French judge issues arrest warrant for cyclist Floyd Landis in alleged hacking incident
A French judge issued an arrest warrant Monday for cyclist Floyd Landis, disgraced and stripped of his 2006 Tour de France title because of doping, in connection with a computer hacking case that occurred as he defended himself.
The court wants to question Landis about allegations that he or someone involved with the cyclist hacked into the computer system of the French national anti-doping lab.
Advertisement
Landis on Monday denied he hacked anything and said no one has served any warrant against him, though he wasn't sure whether his former coach, Arnie Baker, had received one. It was allegedly a computer registered to Baker that is associated with the case.
"I can't speak for Arnie, but no attempt has been made to formally contact me," Landis said in an e-mail. "It appears to be another case of fabricated evidence by a French lab who is still upset a United States citizen believed he should have the right to face his accusers and defend himself."
Baker did not respond to e-mail or phone messages.
French news reports quoted Pierre Bordry, the head of the Paris lab used by the World Anti-Doping Agency, as saying an international warrant had been issued, although a court spokesman later corrected that. The warrant is limited to France's borders, and Landis would have to travel there for an arrest to be made.
Bordry has said the hacking occurred at a time when Landis was trying to defend himself against the failed drug test. Landis, unable to prove his case, was ultimately banned from the sport for two years.
In an e-mail, Landis said he has no idea what motive the French have in pursuing the hacking charges.
"But certainly I hope it's not lost on anyone that it is a grand admission to having substandard computers at their self-proclaimed 'nation's best lab,' " he said.
Travis Tygart, head of the U.S. Anti-Doping Agency said, "Obviously, the French believe they have sufficient evidence to ask Floyd to appear before them. It was a serious breach of security in a high-profile situation. Hopefully, French law enforcement can get to the bottom of it. Somebody hacked the lab and whoever did violated the law."
Yet Landis right now is a man without a team, and he has been relegated to competing in local races, most recently this last weekend in Phoenix. As of now, Landis said, he intends to race only domestically this year.
Friday, February 26, 2010
Thursday, February 25, 2010
Moving and Removing the Start Button
Operating System = Windows Only
Annoyance level = Medium
Damage Level = 0/5
The Objective
The objective is to move the Start button around on the task bar, or to remove it completely from the taskbar.
The Steps
Click twice on the Start button so it has the dotted line around it.
Then press the "Alt" and the "-" keys simultaneously.
This will bring up the option box that allows you to move or close the Start button. If you choose move, you will have to use the arrow keys to move it around the taskbar.
NOTE: Moving it doesn't stay if you move the entire start bar with your mouse, and ending task on explorer.exe or rebooting will put it back in the corner.
Annoyance level = Medium
Damage Level = 0/5
The Objective
The objective is to move the Start button around on the task bar, or to remove it completely from the taskbar.
The Steps
Click twice on the Start button so it has the dotted line around it.
Then press the "Alt" and the "-" keys simultaneously.
This will bring up the option box that allows you to move or close the Start button. If you choose move, you will have to use the arrow keys to move it around the taskbar.
NOTE: Moving it doesn't stay if you move the entire start bar with your mouse, and ending task on explorer.exe or rebooting will put it back in the corner.
Wednesday, February 24, 2010
More Xp Tips and tricks make your computer more faster
Windows XP Tips Collection
Here's how to check if your copy of XP is Activated
Go to the run box and type in oobe/msoobe /a
and hit ok ...theirs your answer
Windows Explorer Tip
When launched in Windows Millennium/Win2k/WinXP,Explorer by default will open the "My Documents" folder. Many people prefer the behavior from previous versions of Windows, where Windows Explorer would open and display "My Computer" instead of the new way. To revert to the old way [My Computer by default rather than My Documents as the default], simply edit the shortcut to Windows Explorer, by right clicking on it, and left clicking "Properties" and changing the "Target" box to: "C:\WINDOWS\EXPLORER.EXE /n,/e," [adjust the path/drive letter if needed]. The key is to add the "/n,/e," to the end of the shortcut (don't type the quotes).
Backup your Fresh install
After you complete your clean install and get all your software installed I would recommend that you use something like Drive Image 3 or 4 to do an image of your install partition, then burn the image to CD and keep it. XP is a different creature for some people. If you mess it up when playing around with it, just bring the image back. You can be up and running again in 20 minutes vs. the two to three hours it will take to get the whole thing and all your stuff installed again.
Note the default install of XP is about 1.5gigs and the DI image may be larger that 700 meg. So don't install too much on the OS partition. To help downsize the Image I run the System file checker and reset the cache size to 40 or 50 meg (It's well over 300 by default).
To run it open the command prop and type:
SFC /?
SFC /purgecache
SFC /cachesize=50
and finally rebuild the cache with SFC /scannow (have the CD ready)
I also Delete the Pagefile.sys and hibernate.sys files before running Drive Image..
Section 2 By Ankit
1.When setting up the system with tweaks or making changes to the core OS or hardware always be logged in as administrator. Seems that while XP does create an account upon install that has administrator privileges, its not the same as the administrator account is. Think about it this way - if the account created was the same then why have an administrator account period?
2.It is always better to install winXP clean than to do an upgrade.
3. The files and settings wizard is your friend. However it doesn't save the account passwords for your e-mail and news groups accounts in OE. Export these accounts manually from within OE first before hand and save them in a safe place. This way you will not need to remember what the account info was, just import the account again.
4. If using a SB Live sound card and trying to run Unreal (the game) you may have some problems. This is not the fault of winXP or Unreal. the problem is a bad driver design from creative and the Devloader portion. There is currently no work around for this problem.
5. Many - many games do run in winXP with comparability mode. The easiest way to do this is to simply create a shortcut on the desktop to the game executable and choose the compatibility tab of the shortcut and set up for win98.
6. Do not disable all the services that you find outlined in the win2K tweak guides floating around. Instead set them to manual instead of disabled. This will allow something to start up when it is needed and you'll avoid the BSOD thing that can occur if something gets disabled that wasn't supposed to.
7. The winXP firewall is actually very good. However it is not very configurable. I would recommend tiny personal firewall from www.tinysoftware.com. It free and all you need. It so far is the most compatible with winXP - why you may ask? - because (little known trivia fun fact here) this is where the winXP firewall came from. Both the XP built in firewall and tiny will give complete stealth. However what you can do - which is kind of cool is divide the work between the two and use both. use tiny to just filter the ports you want to filter instead of everything and let the built in XP firewall take care of the rest. The result is a smoother running firewall system that reacts much more quickly. I've used Nortons , zone alarm (which contrary to popular belief is not a real firewall and a joke in the IT community as a whole) and several of the rest, Tiny has been the best so far.
8. After you complete your clean install and get all your software installed I would recommend that you use something like drive image 4 to do an image of your install partition, then burn the image to CD and keep it. XP is a different creature for some people. If you mess it up when playing around with it, just bring the image back. You can be up and running again in 20 minutes vs. the two to three hours it will take to get the whole thing and all your stuff installed again.
9. choose winXP pro over the personal version because it has more bells and whistles. However if the bells and whistles do not appeal to you then the home (personal) version is the way to go.
10. Avoid problems with WinXP. Insure that your hardware is on the HCL. Don't be mad because the latest and greatest doesn't work with your hardware. It is not the fault of MS , winXP or anything or one else. Not defending them here, just being practical. Look at it this way - if your dream car costs $100,000 dollars and you don't have $100,000 is it the car manufactures fault? nope because thats the free enterprise system and the way it works. Try to upgrade your hardware if you can. If you can't, wait for drivers from the manufacturer that support winxp. I would highly recommend before installing winXP that you go out and get the win2000 drivers for all your hardware. 99% of the win2000 drivers will work in winXP. This way if winxp doesn't have drivers, you do.
XP will ship with out the Virtual Java Machine.
It will not appear on windows update either. Some sites will prompt you to install it upon visit to their sites. However this might change in the near future due to the problem between SUN and MS so the link you get pointed to might no be there.
You can get the virtual Java machine now and have it ready to use when you install XP.
go to:
and download the VJM for winNT. If you try to d/l the one for win2000 (which is exactly the same as the one for NT) you will be told to get the service pack. You don't want to do this for XP.
or download it from:
keep it in a safe place and use it when you install XP.
XP browsing speed up tweak
when you connect to a web site your computer sends information back and forth, this is obvious. Some of this information deals with resolving the site name to an IP address, the stuff that tcp/ip really deals with, not words. This is DNS information and is used so that you will not need to ask for the site location each and every time you visit the site. Although WinXP and win2000 has a pretty efficient DNS cache, you can increase its overall performance by increasing its size.
You can do this with the registry entries below:
************begin copy and paste***********
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dnscache\Parameters]
"CacheHashTableBucketSize"=dword:00000001
"CacheHashTableSize"=dword:00000180
"MaxCacheEntryTtlLimit"=dword:0000fa00
"MaxSOACacheEntryTtlLimit"=dword:0000012d
************end copy and paste***********
make a new text file and rename it to dnscache.reg. The copy and paste the above into it and save it. Then merge it into the registry.
Grouping multiple open windows
WinXP will group multiple open windows (IE windows for example) into one group on the task bar to keep the desktop clear. This can be annoying at times - especially when comparing different web pages because you have to go back to the task bar, click on the group and then click on the page you want and then you only get one page because you have to click on each one separately. I think the default for this is 8 windows - any combination of apps or utilities open.
You can modify this behavior by adding this reg key at:
Change number of windows that are open before XP will start
grouping them on the Taskbar
HKEY_CURRRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\
add reg_Dword "TaskbarGroupSize"
modify "TaskbarGroupSize" entry to be the number of windows you want open before XP starts to group them on the task bar.
A value of 2 will cause the Taskbar buttons to always group
Another tweak is to disable or enable recent documents history. This can be done at:
HKEY_CURRRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\
this key should already be present - if it isn't you'll need to add it:
reg_Binary "NoRecentDocsHistory"
modify it so that value reads 01 00 00 00
Wanna network but don't have all the stuff?
If you want to network two winXP machines together you don't have to install a full blown network setup, i.e...switches, hubs, routers, etc...
All you need is two NIC cards (three if you want to share an Internet connection) and a cross over cable.
1. Connect one NIC to your broadband connection device like normal.
2. Install a second NIC in the machine with the broadband connection.
3. install a NIC in the second machine.
4. connect the cross over cable between the second machine NIC and the second NIC in the board band connection machine.
5. re-boot both.
6. Run the networking wizard if necessary.
or:
use a direct connection setup with a parallel port to parallel port connection to the two machines. You will not be able to share a connection with the direct connect.
Help is just a directory away! - Tip
In windows XP pro at C:\Windows\help - you will find many *.chm files. These are the help files. Just start one up and find what your looking for without going thru the main help menu. If for example you are interested in command line tools or command line references start up the ntcmds.chm file. If you use command line a lot for things just create a shortcut on your desktop to this file and it there when you need it.
You could go thru the Help thing to find these but on the home version some are not linked in some of the help. This is shorter.
Speed things up a bit tip
this might help some of you.
1. go to control panel - system.
2. click on the advanced tab
3. under "performance" click on the settings button
4. click on the Advanced tab
5. click on the "Background Services" button
6. Click OK
Section 3
Windows XP Tips 'n' Tricks
==========================
Please note that some of these tips require you to use a Registry Editor (regedit.exe), which could render your system unusable. Thus, none of these tips are supported in any way: Use them at your own risk. Also note that most of these tips will require you to be logged on with Administrative rights.
Unlocking WinXP's setupp.ini
============================
WinXP's setupp.ini controls how the CD acts. IE is it an OEM version or retail? First, find your setupp.ini file in the i386 directory on your WinXP CD. Open it up, it'll look something like this:
ExtraData=707A667567736F696F697911AE7E05
Pid=55034000
The Pid value is what we're interested in. What's there now looks like a standard default. There are special numbers that determine if it's a retail, oem, or volume license edition. First, we break down that number into two parts. The first five digits determines how the CD will behave, ie is it a retail CD that lets you clean install or upgrade, or an oem CD that only lets you perform a clean install? The last three digits determines what CD key it will accept. You are able to mix and match these values. For example you could make a WinXP CD that acted like a retail CD, yet accepted OEM keys.
Now, for the actual values. Remember the first and last values are interchangeable, but usually you'd keep them as a pair:
Retail = 51882 335
Volume License = 51883 270
OEM = 82503 OEM
So if you wanted a retail CD that took retail keys, the last line of your setupp.ini file would read:
Pid=51882335
And if you wanted a retail CD that took OEM keys, you'd use:
Pid=51882OEM
How do I get the "Administrator" name on Welcome Screen?
=======================================================
To get Admin account on the "Welcome Screen" as well as the other usernames, make sure that there are no accounts logged in.
Press "ctrl-alt-del" twice and you should be able to login as administrator!
finally worked for me after I found out that all accounts have to be logged out first
Fix Movie Interference in AVI files
==================================
If you have any AVI files that you saved in Windows 9x, which have interference when opened in Windows XP, there is an easy fix to get rid of the interference:
Open Windows Movie Maker.
Click View and then click Options.
Click in the box to remove the check mark beside Automatically create clips.
Now, import the movie file that has interference and drag it onto the timeline. Then save the movie, and during the re rendering, the interference will be removed.
Create a Password Reset Disk
============================
If you?re running Windows XP Professional as a local user in a workgroup environment, you can create a password reset disk to log onto your computer when you forget your password. To create the disk:
Click Start, click Control Panel, and then click User Accounts.
Click your account name.
Under Related Tasks, click Prevent a forgotten password.
Follow the directions in the Forgotten Password Wizard to create a password reset disk.
Store the disk in a secure location, because anyone using it can access your local user account
Change Web Page Font Size on the Fly
====================================
If your mouse contains a wheel for scrolling, you can change font size on the fly when viewing a Web page. To do so:
Press and hold Ctrl. Scroll down (or towards yourself) to enlarge the font size. Scroll up (or away from yourself) to reduce the font size.
You might find it useful to reduce font size when printing a Web page, so that you can fit more content on the page.
WinXP Clear Page file on shutdown
=================================
WINXPCPS.REG (WinXP Clear Page file on shutdown)
This Registration (.REG) file clears the Page file when you power off the computer.
Restart Windows for these changes to take effect!
ALWAYS BACKUP YOUR SYSTEM BEFORE MAKING ANY CHANGES!
Browse to: HKEY_LOCAL_MACHINE \ System \ CurrentControlSet \ Control \ Session Manager \ Memory Management
and add the DWORD variable "ClearPageFileAtShutdown"=dword:00000001
You can also do this without reg hacking.
Go to Control panel Administrative tools, local security policy. then go to local policies ---> security options.
Then change the option for "Shutdown: Clear Virtual Memory Pagefile"
Group Policy for Windows XP
===========================
One of the most full featured Windows XP configuration tools available is hidden right there in your system, but most people don't even know it exists. It's called the Local Group Policy Editor, or gpedit for short. To invoke this editor, select Start and then Run, then type the following:
gpedit.msc
After you hit ENTER, you'll be greeted by gpedit, which lets you modify virtually every feature in Windows XP without having to resort to regedit. Dig around and enjoy!
Forgetting What Your Files Are?
===============================
This procedure works under NTFS.
As times goes along you have a lot files on your computer. You are going to forget what they are. Well here is way to identify them as you scroll through Windows Explorer in the future.
This procedure works under NTFS.
1.. Open up a folder on your system that you want to keep track of the different files you might one to identify in the future.
2.. Under View make certain that you set it to the Details.
3.. Highlight the file you want to keep more information on. Right click the file and you will get a pop up menu. Click on properties.
4.. Click on the Summary Tab (make sure it says simple not advanced on the button in the box), You should now get the following fields,
Title,Subject, Author, Category, Keywords, Comments
You will see advanced also if you have changed it to simple, Here will be other fields you can fill in.
5.. Next you can fill in what ever field you want.
6.. After you finished click the apply button then OK.
7.. Next right click the bar above your files, under the address bar and you should get a drop down menu. Here you can click the fields you want to display.
8.. You should now see a list with the new fields and any comments you have done.
9.. Now if you want to sort these just right click a blank spot and then you sort the information to your liking.
Temporarily Assign Yourself Administrative Permissions
======================================================
Many programs require you to have Administrative permissions to be able to install them. Here is an easy way to temporarily assign yourself Administrative permissions while you remain logged in as a normal user.
Hold down the Shift key as you right-click on the program?s setup file.
Click Run as.
Type in a username and password that have Administrative permissions.
This will also work on applications in the Start menu.
Create a Shortcut to Lock Your Computer
=======================================
Leaving your computer in a hurry but you don?t want to log off? You can double-click a shortcut on your desktop to quickly lock the keyboard and display without using CTRL+ALT+DEL or a screen saver.
To create a shortcut on your desktop to lock your computer:
Right-click the desktop.
Point to New, and then click Shortcut.
The Create Shortcut Wizard opens. In the text box, type the following:
rundll32.exe user32.dll,LockWorkStation
Click Next.
Enter a name for the shortcut. You can call it "Lock Workstation" or choose any name you like.
Click Finish.
You can also change the shortcut's icon (my personal favorite is the padlock icon in shell32.dll).
To change the icon:
Right click the shortcut and then select Properties.
Click the Shortcut tab, and then click the Change Icon button.
In the Look for icons in this file text box, type:
Shell32.dll.
Click OK.
Select one of the icons from the list and then click OK
You could also give it a shortcut keystroke such CTRL+ALT+L. This would save you only one keystroke from the normal command, but it could be more convenient.
Create a Shortcut to Start Remote Desktop
=========================================
Tip: You can add a shortcut to the desktop of your home computer to quickly start Remote Desktop and connect to your office computer.
To create a shortcut icon to start Remote Desktop
Click Start, point to More Programs, point to Accessories, point to Communications, and then click on Remote Desktop Connection.
Click Options.
Configure settings for the connection to your office computer.
Click Save As, and enter a name, such as Office Computer. Click Save.
Open the Remote Desktops folder.
Right-click on the file named Office Computer, and then click Create Shortcut.
Drag the shortcut onto the desktop of your home computer.
To start Remote Desktop and connect to your office computer, double-click on the shortcut
Instantly Activate a Screen saver
================================
Turn on a screen saver without having to wait by adding a shortcut to your desktop:
Click the Start button, and then click Search.
In the Search Companion window, click All file types.
In the file name box, type *.scr
In the Look in box, choose Local Hard Drives (C or the drive where you have system files stored on your computer.
Click Search.
You will see a list of screen savers in the results. Pick a screen saver you want. You can preview it by double-clicking it.
Right click on the file, choose Send To, and then click Desktop (create shortcut).
To activate the screen saver, double-click the icon on your desktop
Add a Map Drive Button to the Toolbar
=====================================
Do you want to quickly map a drive, but can?t find the toolbar button? If you map drives often, use one of these options to add a Map Drive button to the folder toolbar.
Option One (Long Term Fix)
Click Start, click My Computer, right-click the toolbar, then unlock the toolbars, if necessary.
Right-click the toolbar again, and then click Customize.
Under Available toolbar buttons, locate Map Drive, and drag it into the position you want on the right under Current toolbar buttons.
Click Close, click OK, and then click OK again.
You now have drive mapping buttons on your toolbar, so you can map drives from any folder window. To unmap drives, follow the above procedure, selecting Disconnect under Available toolbar buttons. To quickly map a drive, try this option.
Option Two (Quick Fix)
Click Start, and right-click My Computer.
Click Map Network Drive.
If you place your My Computer icon directly on the desktop, you can make this move in only two clicks!
Software not installing?
========================
If you have a piece of software that refuses to install because it says that you are not running Windows 2000 (such as the Win2K drivers for a Mustek scanner!!) you can simply edit HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows NT/CurrentVersion/ProductName to say Microsoft Windows 2000 instead of XP and it will install. You may also have to edit the version number or build number, depending on how hard the program tries to verify that you are installing on the correct OS. I had to do this for my Mustek 600 CP scanner (compatibility mode didn't' help!!!) and it worked great, so I now have my scanner working with XP (and a tech at Mustek can now eat his words).
BTW, don't' forget to restore any changes you make after you get your software installed
You do this at your own risk.
Use your Windows Key
====================
The Windows logo key, located in the bottom row of most computer keyboards is a little-used treasure. Don't' ignore it. It is the shortcut anchor for the following commands:
Windows: Display the Start menu
Windows + D: Minimize or restore all windows
Windows + E: Display Windows Explorer
Windows + F: Display Search for files
Windows + Ctrl + F: Display Search for computer
Windows + F1: Display Help and Support Center
Windows + R: Display Run dialog box
Windows + break: Display System Properties dialog box
Windows + shift + M: Undo minimize all windows
Windows + L: Lock the workstation
Windows + U: Open Utility Manager
Windows + Q: Quick switching of users (Powertoys only)
Windows + Q: Hold Windows Key, then tap Q to scroll thru the different users on your PC
Change your CD key
==================
You don't need to re-install if you want to try the key out ... just do this:
1. Go to Activate Windows
2. Select the Telephone option
3. Click "Change Product Key"
4. Enter RK7J8-2PGYQ-P47VV-V6PMB-F6XPQ
5. Click "Update"
Now log off and log back in again. It should now show 60 days left, minus the number of days it had already counted down.
Note: If your crack de-activated REGWIZC.DLL and LICDLL.DLL, you are going to have to re-register them.
Remove the Shared Documents folders from My Computer
====================================================
One of the most annoying things about the new Windows XP user interface is that Microsoft saw fit to provide links to all of the Shared Documents folders on your system, right at the top of the My Computer window. I can't imagine why this would be the default, even in a shared PC environment at home, but what's even more annoying is that you cannot change this behavior through the sh*ll
: Those icons are stuck there and you have to live with it.
Until now, that is.
Simply fire up the Registry Editor and navigate to the following key:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \ My Computer \ NameSpace \ DelegateFolders
You'll see a sub-key named {59031a47-3f72-44a7-89c5-5595fe6b30ee}. If you delete this, all of the Shared Documents folders (which are normally under the group called "Other Files Stored on This Computer" will be gone.
You do not need to reboot your system to see the change.
Before: A cluttered mess with icons no one will ever use (especially that orphaned one). After: Simplicity itself, and the way it should be by default.
This tip For older XP builds
===================
Edit or remove the "Comments" link in window title bars
During the Windows XP beta, Microsoft has added a "Comments?" hyperlink to the title bar of each window in the system so that beta testers can more easily send in a problem report about the user interface. But for most of us, this isn't an issue, and the Comments link is simply a visual distraction. And for many programs that alter the title bar, the Comments link renders the Minimize, Maximize, and Close window buttons unusable, so it's actually a problem.
Let's get rid of it. Or, if you're into this kind of thing, you can edit it too.
Open the Registry Editor and navigate to the following keys:
My Computer \ HKEY_CURRENT_USER \ Control Panel \ Desktop \ LameButtonEnabled
My Computer \ HKEY_CURRENT_USER \ Control Panel \ Desktop \ LameButtonText
The first key determines whether the link appears at all; change its value to 0 to turn it off. The second key lets you have a little fun with the hyperlink; you can change the text to anything you'd like, such as "Paul Thurrott" or whatever.
Editing either value requires a restart before the changes take effect.
Before: An unnecessary hyperlink. Have some fun with it! Or just remove it entirely. It's up to you.
Rip high-quality MP3s in Windows Media Player 8
================================================
The relationship between Windows Media Player 8 and the MP3 audio format is widely misunderstood. Basically, WMP8 will be able to playback MP3 files, but encoding (or "ripping" CD audio into MP3 format will require an MP3 plug-in. So during the Windows XP beta, Microsoft is supplying a sample MP3 plug-in for testing purposes, but it's limited to 56 Kbps rips, which is pretty useless. However, if you have an externally installed MP3 codec, you can use WMP8 to rip at higher bit rates. But you'll have to edit the Registry to make this work.
Fire up the Registry Editor and navigate to the following key:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ MediaPlayer \ Settings \ MP3Encoding
Here, you'll see sub-keys for LowRate and LowRateSample, which of course equates to the single 56 Kbps sample rate you see in WMP8. To get better sampling rates, try adding the following keys (Using New then DWORD value):
"LowRate" = DWORD value of 0000dac0
"MediumRate" = DWORD value of 0000fa00
"MediumHighRate" = DWORD value of 0001f400
"HighRate" = DWORD value of 0002ee00
Now, when you launch WMP8 and go into Tools, then Options, then Copy Music, you will have four encoding choices for MP3: 56 Kbps, 64 Kbps, 128 Kbps, and 192 Kbps. Note that you will not get higher bit rate encoding unless you have installed an MP3 codec separately; the version in Windows Media Player 8 is limited to 56 Kbps only.
Find the appropriate location in the Registry... ...add a few DWORD values... ...And then you'll be ripping CDs in higher-quality MP3 format!
Speed up the Start Menu
=======================
The default speed of the Start Menu is pretty slow, but you can fix that by editing a Registry Key. Fire up the Registry Editor and navigate to the following key:
HKEY_CURRENT_USER \ Control Panel \ Desktop \ MenuShowDelay
By default, the value is 400. Change this to a smaller value, such as 0, to speed it up.
Speed up the Start Menu (Part two)
==================================
If your confounded by the slow speed of the Start Menu, even after using the tip above, then you might try the following: Navigate to Display Properties then Appearance then Advanced and turn off the option titled Show menu shadow . You will get much better overall performance.
Speed up Internet Explorer 6 Favorites
======================================
For some reason, the Favorites menu in IE 6 seems to slow down dramatically sometimes--I've noticed this happens when you install Tweak UI 1.33, for example, and when you use the preview tip to speed up the Start menu. But here's a fix for the problem that does work, though it's unclear why:
Just open a command line window (Start button -> Run -> cmd) and type sfc, then hit ENTER. This command line runs the System File Checker, which performs a number of services, all of which are completely unrelated to IE 6. But there you go: It works.
Do an unattended installation
=============================
The Windows XP Setup routine is much nicer than that in Windows 2000 or Windows Me, but it's still an hour-long process that forces you to sit in front of your computer for an hour, answering dialog boxes and typing in product keys. But Windows XP picks up one of the more useful features from Windows 2000, the ability to do an unattended installation, so you can simply prepare a script that will answer all those dialogs for you and let you spend some quality time with your family.
I've written about Windows 2000 unattended installations and the process is pretty much identical on Windows XP, so please read that article carefully before proceeding. And you need to be aware that this feature is designed for a standalone Windows XP system: If you want to dual-boot Windows XP with another OS, you're going to have to go through the interactive Setup just like everyone else: An unattended install will wipe out your hard drive and install only Windows XP, usually.
To perform an unattended installation, you just need to work with the Setup Manager, which is located on the Windows XP CD-ROM in D:\SupportTools\DEPLOY.CAB by default: Extract the contents of this file and you'll find a number of useful tools and help files; the one we're interested in is named setupmgr.exe. This is a very simple wizard application that will walk you through the process of creating an answer file called winnt.sif that can be used to guide Windows XP Setup through the unattended installation.
One final tip: There's one thing that Setup Manager doesn't add: Your product key. However, you can add this to the unattend.txt file manually. Simply open the file in Notepad and add the following line under the [UserData] section:
ProductID=RK7J8-2PGYQ-P47VV-V6PMB-F6XPQ
(This is a 60 day CD key)
Then, just copy winnt.sif to a floppy, put your Windows XP CD-ROM in the CD drive, and reboot: When the CD auto-boots, it will look for the unattend.txt file in A: automatically, and use it to answer the Setup questions if it's there.
Finally, please remember that this will wipe out your system! Back up first, and spend some time with the help files in DEPLOY.CAB before proceeding.
For Older builds or not using setupreg.hiv file
===============================================
Remove the Desktop version text
During the Windows XP beta, you will see text in the lower right corner of the screen that says Windows XP Professional, Evaluation Copy. Build 2462 or similar. A lot of people would like to remove this text for some reason, and while it's possible to do so, the cure is more damaging than the problem, in my opinion. So the following step will remove this text, but you'll lose a lot of the nice graphical effects that come in Windows XP, such as the see-through icon text.
To remove the desktop version text, open Display Properties (right-click the desktop, then choose Properties) and navigate to the Desktop page. Click Customize Desktop and then choose the Web page in the resulting dialog. On this page, check the option titled Lock desktop items. Click OK to close the dialog, and then OK to close Display Properties. The text disappears. But now the rest of your system is really ugly. You can reverse the process by unchecking Lock desktop items.
There's also a shortcut for this process: Just right-click the desktop and choose Arrange by then Lock Web Icons on the Desktop.
--------------------------------------------------------------------------------
Enable ClearType on the Welcome Screen!
=======================================
As laptop users and other LCD owners are quickly realizing, Microsoft's ClearType technology in Windows XP really makes a big difference for readability. But the this feature is enabled on a per-user basis in Windows XP, so you can't see the effect on the Welcome screen; it only appears after you logon.
But you can fix that. Fire up the Registry Editor and look for the following keys:
(default user) HKEY_USERS \ .Default \ Control Panel \ Desktop \ FontSmoothing (String Value)
HKEY_USERS \ .Default \ Control Panel \ Desktop \ FontSmoothingType (Hexadecimal DWORD Value)
Make sure both of these values are set to 2 and you'll have ClearType enabled on the Welcome screen and on each new user by default.
Stop Windows Messenger from Auto-Starting
=========================================
If you're not a big fan of Windows Messenger simply delete the following Registry Key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run\MSMSGS
Display Hibernate Option on the Shut Down dialog
================================================
For some reason, Hibernate may not be available from the default Shut Down dialog. But you can enable it simply enough, by holding down the SHIFT key while the dialog is visible. Now you see it, now you don't!
Add album art to any music folder
=================================
One of the coolest new features in Windows XP is its album thumbnail generator, which automatically places the appropriate album cover art on the folder to which you are copying music (generally in WMA format). But what about those people that have already copied their CDs to the hard drive using MP3 format? You can download album cover art from sites such as cdnow.com or amguide.com, and then use the new Windows XP folder customize feature to display the proper image for each folder. But this takes time--you have to manually edit the folder properties for every single folder--and you will lose customizations if you have to reinstall the OS. There's an excellent fix, however.
When you download the album cover art from the Web, just save the images as folder.jpg each time and place them in the appropriate folder. Then, Windows XP will automatically use that image as the thumbnail for that folder and, best of all, will use that image in Windows Media Player for Windows XP (MPXP) if you choose to display album cover art instead of a visualization. And the folder customization is automatic, so it survives an OS reinstallation as well. Your music folders never looked so good!
Album cover art makes music folder thumbnails look better than ever!
Change the location of the My Music or My Pictures folders
======================================================
In Windows 2000, Microsoft added the ability to right-click the My Documents folder and choose a new location for that folder in the shell
. With Windows XP, Microsoft has elevated the My Music and My Pictures folders to the same "special shell folder" status of My Documents, but they never added a similar (and simple) method for changing those folder's locations. However, it is actually pretty easy to change the location of these folders, using the following method.
Open a My Computer window and navigate to the location where you'd like My Music (or My Pictures) to reside. Then, open the My Documents folder in a different window. Drag the My Music (or My Pictures) folder to the other window, and Windows XP will update all of the references to that folder to the new location, including the Start menu.
Or use Tweak UI
Add/Remove optional features of Windows XP
==========================================
To dramatically expand the list of applications you can remove from Windows XP after installation, navigate to C:\WINDOWS\inf (substituting the correct drive letter for your version of Windows) and open the sysoc.inf file. Under Windows XP Professional Edition RC1, this file will resemble the following by default:
[Version] Signature = "$Windows NT$"
DriverVer=06/26/2001,5.1.2505.0
[Components]
NtComponents=ntoc.dll,NtOcSetupProc,,4
WBEM=ocgen.dll,OcEntry,wbemoc.inf,hide,7
Display=desk.cpl,DisplayOcSetupProc,,7
Fax=fxsocm.dll,FaxOcmSetupProc,fxsocm.inf,,7
NetOC=netoc.dll,NetOcSetupProc,netoc.inf,,7
iis=iis.dll,OcEntry,iis.inf,,7
com=comsetup.dll,OcEntry,comnt5.inf,hide,7
dtc=msdtcstp.dll,OcEntry,dtcnt5.inf,hide,7
IndexSrv_System = setupqry.dll,IndexSrv,setupqry.inf,,7
TerminalServer=TsOc.dll, HydraOc, TsOc.inf,hide,2
msmq=msmqocm.dll,MsmqOcm,msmqocm.inf,,6
ims=imsinsnt.dll,OcEntry,ims.inf,,7
fp_extensions=fp40ext.dll,FrontPage4Extensions,fp40ext.inf,,7
AutoUpdate=ocgen.dll,OcEntry,au.inf,hide,7
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
msnexplr=ocmsn.dll,OcEntry,msnmsn.inf,,7
smarttgs=ocgen.dll,OcEntry,msnsl.inf,,7
RootAutoUpdate=ocgen.dll,OcEntry,rootau.inf,,7
Games=ocgen.dll,OcEntry,games.inf,,7
AccessUtil=ocgen.dll,OcEntry,accessor.inf,,7
CommApps=ocgen.dll,OcEntry,communic.inf,HIDE,7
MultiM=ocgen.dll,OcEntry,multimed.inf,HIDE,7
AccessOpt=ocgen.dll,OcEntry,optional.inf,HIDE,7
Pinball=ocgen.dll,OcEntry,pinball.inf,HIDE,7
MSWordPad=ocgen.dll,OcEntry,wordpad.inf,HIDE,7
ZoneGames=zoneoc.dll,ZoneSetupProc,igames.inf,,7
[Global]
WindowTitle=%WindowTitle%
WindowTitle.StandAlone="*"
The entries that include the text hide or HIDE will not show up in Add/Remove Windows Components by default. To fix this, do a global search and replace for ,hide and change each instance of this to , (a comma). Then, save the file, relaunch Add/Remove Windows Components, and tweak the installed applications to your heart's content.
Cool, eh? There are even more new options now under "Accessories and Utilities" too.
Remove Windows Messenger
========================
It seems that a lot of people are interested in removing Windows Messenger for some reason, though I strongly recommend against this: In Windows XP, Windows Messenger will be the hub of your connection to the .NET world, and now that this feature is part of Windows, I think we're going to see a lot of .NET Passport-enabled Web sites appearing as well. But if you can't stand the little app, there are a couple of ways to get rid of it, and ensure that it doesn't pop up every time you boot into XP. The best way simply utilizes the previous tip:
If you'd like Windows Messenger to show up in the list of programs you can add and remove from Windows, navigate to C:\WINDOWS\inf (substituting the correct drive letter for your version of Windows) and open sysoc.inf (see the previous tip for more information about this file). You'll see a line that reads:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
Change this to the following and Windows Messenger will appear in Add or Remove Programs, then Add/Remove Windows Components, then , and you can remove it for good:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,7
Autolog On tip for XP
real easy and straight forward.
1. click on "Start" - then click on "Run" - type "control userpasswords2"
2. click OK
3. On the Users tab, clear the "Users must enter a user name and password to
use this computer" check box.
4. A dialog will appear that asks you what user name and password should be used to logon automatically.
Your all set.
Aspi
WinXP does not come with an Aspi layer. So far almost 90% of the problems with winXP and CD burning software are Aspi layer problems. After installing winXP, before installing any CD burning software do a few things first:
1. Open up "My computer" and right click on the CD Recorder. If your CD recorder was detected as a CD recorder there will be a tab called "Recording". On this tab uncheck ALL of the boxes. apply or OK out of it and close my computer.
2. Next install the standard Aspi layer for NT. Reboot when asked.
Thats is. after the reboot you can install any of the currently working CD recording applications with no problems. If using CD Creator do not install direct CD or Take two as they are currently incompatible but Roxio has promised a fix as soon as XP is released.
Print Dir
XP alas does not include a way to print a directory listing aside from using the command prompt. I talking about a right click on the directory and print the files names on the printer type of Dir print. So I guess we will need to add one - start up regedit and add the following
[HKEY_CLASSES_ROOT\Folder\shell\print\command]
@="command.com /c dir %1 > PRN"
[HKEY_CLASSES_ROOT\Folder\shell\print\command]
@="command.com /c dir %1 > dirprnt.txt"
Right click on a folder in windows explorer and choose "print". The contents of the folder will appear in a file called dirprnt.txt in the folder. open the file and print it out. If you want to print directly to the printer remove the second line containing "dirprnt.txt"
Rename Multiple files
A new, small, neat feature for winXP deals with renaming files. I personally have always wanted the OS to include a way to do a mass file renaming on a bunch of files. You can now rename multiple files at once in WinXP. Its real simple:
1. Select several files in Explorer, press F2 and rename one of those files to
something else. All the selected files get renamed to the new file name (plus a number added to the end).
2. thats it. Simple huh.
I would recommend that you only have the files you want to rename in the directory your working in. I would also recommend that until you get used to this neat little trick that you save copies of the files in a safe location while your getting the hang of it.
Handy for renaming those mass amounts of porn pics you d/l from the web
Use Window Blinds XP to add themes
Windows Blinds XP has been integrated into the Windows XP operating system. Microsoft and Stardock have entered into a partnership in which Microsoft will use their technology in the Windows XP operating system. With Windows Blinds XP installed you have additional styles to choose from in display properties.
And the best part is you can download over 1000 different styles and even make your own very easily with the SDK.
To get started you need to download the Windows Blinds XP extension: www.stardock.com/files/wbxp-b5_private.exe to download the latest beta
Note: You must register at http://scripting.stardock.com/customer/wbxp_beta.asp to be able to legally download the Windows Blinds XP beta. Once you register they will even e-mail you when new builds are available for download.
Once downloaded, install the program and you will notice the extra styles in the display properties when you run the program.
To download more styles www.wincustomize.com/index.asp and select windows blinds on the menu on the left.
Show file extensions
Ever wonder where you file extensions went? Working with files when you can not tell what the file extension can be a huge pain in the butt. Thankfully, MS has made it possible for all file names with the extensions to be shown.
In any folder that contains files. Click on the tools menu and select folder options.
Then click on the view tab.
Locate where it lists Hide extensions of known file types and uncheck it.
Click OK.
XP memory tweaks
Below are some Windows XP memory tweaks. They are located in the windows registry at: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management
DisablePagingExecutive - When enabled, this setting will prevent the paging of the Win2k Executive files to the hard drive, causing the OS and most programs to be more responsive. However, it is advised that people should only perform this tweak if they have a significant amount of RAM on their system (more than 128 MB), because this setting does use a substantial portion of your system resources. By default, the value of this key is 0. To enable it, set it to 1.
LargeSystemCache - When enabled (the default on Server versions of Windows 2000), this setting tells the OS to devote all but 4 MB of system memory (which is left for disk caching) to the file system cache. The main effect of this is allowing the computer to cache the OS Kernel to memory, making the OS more responsive. The setting is dynamic and if more than 4 MB is needed from the disk cache for some reason, the space will be released to it. By default, 8MB is earmarked for this purpose. This tweak usually makes the OS more responsive. It is a dynamic setting, and the kernel will give up any space deemed necessary for another application (at a performance hit when such changes are needed). As with the previous key, set the value from 0 to 1 to enable. Note that in doing this, you are consuming more of your system RAM than normal. While LargeSystemCache will cut back usage when other apps need more RAM, this process can impede performance in certain intensive situations. According to Microsoft, the "[0] setting is recommended for servers running applications that do their own memory caching, such as Microsoft SQL Server, and for applications that perform best with ample memory, such as Internet Information Services."
IOPageLockLimit - This tweak is of questionable value to people that aren't running some kind of server off of their computer, but we will include it anyway. This tweak boosts the Input/Output performance of your computer when it is doing a large amount of file transfers and other similar operations. This tweak won't do much of anything for a system without a significant amount of RAM (if you don't have more than 128 MB, don't even bother), but systems with more than 128 MB of RAM will generally find a performance boost by setting this to between 8 and 16 MB. The default is 0.5 MB, or 512 KB. This setting requires a value in bytes, so multiply the desired number of megabytes * 1024 * 1024. That's X * 1048576 (where X is the number, in megabytes). Test out several settings and keep the one which seems to work best for your system.
Here's how to check if your copy of XP is Activated
Go to the run box and type in oobe/msoobe /a
and hit ok ...theirs your answer
Windows Explorer Tip
When launched in Windows Millennium/Win2k/WinXP,Explorer by default will open the "My Documents" folder. Many people prefer the behavior from previous versions of Windows, where Windows Explorer would open and display "My Computer" instead of the new way. To revert to the old way [My Computer by default rather than My Documents as the default], simply edit the shortcut to Windows Explorer, by right clicking on it, and left clicking "Properties" and changing the "Target" box to: "C:\WINDOWS\EXPLORER.EXE /n,/e," [adjust the path/drive letter if needed]. The key is to add the "/n,/e," to the end of the shortcut (don't type the quotes).
Backup your Fresh install
After you complete your clean install and get all your software installed I would recommend that you use something like Drive Image 3 or 4 to do an image of your install partition, then burn the image to CD and keep it. XP is a different creature for some people. If you mess it up when playing around with it, just bring the image back. You can be up and running again in 20 minutes vs. the two to three hours it will take to get the whole thing and all your stuff installed again.
Note the default install of XP is about 1.5gigs and the DI image may be larger that 700 meg. So don't install too much on the OS partition. To help downsize the Image I run the System file checker and reset the cache size to 40 or 50 meg (It's well over 300 by default).
To run it open the command prop and type:
SFC /?
SFC /purgecache
SFC /cachesize=50
and finally rebuild the cache with SFC /scannow (have the CD ready)
I also Delete the Pagefile.sys and hibernate.sys files before running Drive Image..
Section 2 By Ankit
1.When setting up the system with tweaks or making changes to the core OS or hardware always be logged in as administrator. Seems that while XP does create an account upon install that has administrator privileges, its not the same as the administrator account is. Think about it this way - if the account created was the same then why have an administrator account period?
2.It is always better to install winXP clean than to do an upgrade.
3. The files and settings wizard is your friend. However it doesn't save the account passwords for your e-mail and news groups accounts in OE. Export these accounts manually from within OE first before hand and save them in a safe place. This way you will not need to remember what the account info was, just import the account again.
4. If using a SB Live sound card and trying to run Unreal (the game) you may have some problems. This is not the fault of winXP or Unreal. the problem is a bad driver design from creative and the Devloader portion. There is currently no work around for this problem.
5. Many - many games do run in winXP with comparability mode. The easiest way to do this is to simply create a shortcut on the desktop to the game executable and choose the compatibility tab of the shortcut and set up for win98.
6. Do not disable all the services that you find outlined in the win2K tweak guides floating around. Instead set them to manual instead of disabled. This will allow something to start up when it is needed and you'll avoid the BSOD thing that can occur if something gets disabled that wasn't supposed to.
7. The winXP firewall is actually very good. However it is not very configurable. I would recommend tiny personal firewall from www.tinysoftware.com. It free and all you need. It so far is the most compatible with winXP - why you may ask? - because (little known trivia fun fact here) this is where the winXP firewall came from. Both the XP built in firewall and tiny will give complete stealth. However what you can do - which is kind of cool is divide the work between the two and use both. use tiny to just filter the ports you want to filter instead of everything and let the built in XP firewall take care of the rest. The result is a smoother running firewall system that reacts much more quickly. I've used Nortons , zone alarm (which contrary to popular belief is not a real firewall and a joke in the IT community as a whole) and several of the rest, Tiny has been the best so far.
8. After you complete your clean install and get all your software installed I would recommend that you use something like drive image 4 to do an image of your install partition, then burn the image to CD and keep it. XP is a different creature for some people. If you mess it up when playing around with it, just bring the image back. You can be up and running again in 20 minutes vs. the two to three hours it will take to get the whole thing and all your stuff installed again.
9. choose winXP pro over the personal version because it has more bells and whistles. However if the bells and whistles do not appeal to you then the home (personal) version is the way to go.
10. Avoid problems with WinXP. Insure that your hardware is on the HCL. Don't be mad because the latest and greatest doesn't work with your hardware. It is not the fault of MS , winXP or anything or one else. Not defending them here, just being practical. Look at it this way - if your dream car costs $100,000 dollars and you don't have $100,000 is it the car manufactures fault? nope because thats the free enterprise system and the way it works. Try to upgrade your hardware if you can. If you can't, wait for drivers from the manufacturer that support winxp. I would highly recommend before installing winXP that you go out and get the win2000 drivers for all your hardware. 99% of the win2000 drivers will work in winXP. This way if winxp doesn't have drivers, you do.
XP will ship with out the Virtual Java Machine.
It will not appear on windows update either. Some sites will prompt you to install it upon visit to their sites. However this might change in the near future due to the problem between SUN and MS so the link you get pointed to might no be there.
You can get the virtual Java machine now and have it ready to use when you install XP.
go to:
and download the VJM for winNT. If you try to d/l the one for win2000 (which is exactly the same as the one for NT) you will be told to get the service pack. You don't want to do this for XP.
or download it from:
keep it in a safe place and use it when you install XP.
XP browsing speed up tweak
when you connect to a web site your computer sends information back and forth, this is obvious. Some of this information deals with resolving the site name to an IP address, the stuff that tcp/ip really deals with, not words. This is DNS information and is used so that you will not need to ask for the site location each and every time you visit the site. Although WinXP and win2000 has a pretty efficient DNS cache, you can increase its overall performance by increasing its size.
You can do this with the registry entries below:
************begin copy and paste***********
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dnscache\Parameters]
"CacheHashTableBucketSize"=dword:00000001
"CacheHashTableSize"=dword:00000180
"MaxCacheEntryTtlLimit"=dword:0000fa00
"MaxSOACacheEntryTtlLimit"=dword:0000012d
************end copy and paste***********
make a new text file and rename it to dnscache.reg. The copy and paste the above into it and save it. Then merge it into the registry.
Grouping multiple open windows
WinXP will group multiple open windows (IE windows for example) into one group on the task bar to keep the desktop clear. This can be annoying at times - especially when comparing different web pages because you have to go back to the task bar, click on the group and then click on the page you want and then you only get one page because you have to click on each one separately. I think the default for this is 8 windows - any combination of apps or utilities open.
You can modify this behavior by adding this reg key at:
Change number of windows that are open before XP will start
grouping them on the Taskbar
HKEY_CURRRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\
add reg_Dword "TaskbarGroupSize"
modify "TaskbarGroupSize" entry to be the number of windows you want open before XP starts to group them on the task bar.
A value of 2 will cause the Taskbar buttons to always group
Another tweak is to disable or enable recent documents history. This can be done at:
HKEY_CURRRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\
this key should already be present - if it isn't you'll need to add it:
reg_Binary "NoRecentDocsHistory"
modify it so that value reads 01 00 00 00
Wanna network but don't have all the stuff?
If you want to network two winXP machines together you don't have to install a full blown network setup, i.e...switches, hubs, routers, etc...
All you need is two NIC cards (three if you want to share an Internet connection) and a cross over cable.
1. Connect one NIC to your broadband connection device like normal.
2. Install a second NIC in the machine with the broadband connection.
3. install a NIC in the second machine.
4. connect the cross over cable between the second machine NIC and the second NIC in the board band connection machine.
5. re-boot both.
6. Run the networking wizard if necessary.
or:
use a direct connection setup with a parallel port to parallel port connection to the two machines. You will not be able to share a connection with the direct connect.
Help is just a directory away! - Tip
In windows XP pro at C:\Windows\help - you will find many *.chm files. These are the help files. Just start one up and find what your looking for without going thru the main help menu. If for example you are interested in command line tools or command line references start up the ntcmds.chm file. If you use command line a lot for things just create a shortcut on your desktop to this file and it there when you need it.
You could go thru the Help thing to find these but on the home version some are not linked in some of the help. This is shorter.
Speed things up a bit tip
this might help some of you.
1. go to control panel - system.
2. click on the advanced tab
3. under "performance" click on the settings button
4. click on the Advanced tab
5. click on the "Background Services" button
6. Click OK
Section 3
Windows XP Tips 'n' Tricks
==========================
Please note that some of these tips require you to use a Registry Editor (regedit.exe), which could render your system unusable. Thus, none of these tips are supported in any way: Use them at your own risk. Also note that most of these tips will require you to be logged on with Administrative rights.
Unlocking WinXP's setupp.ini
============================
WinXP's setupp.ini controls how the CD acts. IE is it an OEM version or retail? First, find your setupp.ini file in the i386 directory on your WinXP CD. Open it up, it'll look something like this:
ExtraData=707A667567736F696F697911AE7E05
Pid=55034000
The Pid value is what we're interested in. What's there now looks like a standard default. There are special numbers that determine if it's a retail, oem, or volume license edition. First, we break down that number into two parts. The first five digits determines how the CD will behave, ie is it a retail CD that lets you clean install or upgrade, or an oem CD that only lets you perform a clean install? The last three digits determines what CD key it will accept. You are able to mix and match these values. For example you could make a WinXP CD that acted like a retail CD, yet accepted OEM keys.
Now, for the actual values. Remember the first and last values are interchangeable, but usually you'd keep them as a pair:
Retail = 51882 335
Volume License = 51883 270
OEM = 82503 OEM
So if you wanted a retail CD that took retail keys, the last line of your setupp.ini file would read:
Pid=51882335
And if you wanted a retail CD that took OEM keys, you'd use:
Pid=51882OEM
How do I get the "Administrator" name on Welcome Screen?
=======================================================
To get Admin account on the "Welcome Screen" as well as the other usernames, make sure that there are no accounts logged in.
Press "ctrl-alt-del" twice and you should be able to login as administrator!
finally worked for me after I found out that all accounts have to be logged out first
Fix Movie Interference in AVI files
==================================
If you have any AVI files that you saved in Windows 9x, which have interference when opened in Windows XP, there is an easy fix to get rid of the interference:
Open Windows Movie Maker.
Click View and then click Options.
Click in the box to remove the check mark beside Automatically create clips.
Now, import the movie file that has interference and drag it onto the timeline. Then save the movie, and during the re rendering, the interference will be removed.
Create a Password Reset Disk
============================
If you?re running Windows XP Professional as a local user in a workgroup environment, you can create a password reset disk to log onto your computer when you forget your password. To create the disk:
Click Start, click Control Panel, and then click User Accounts.
Click your account name.
Under Related Tasks, click Prevent a forgotten password.
Follow the directions in the Forgotten Password Wizard to create a password reset disk.
Store the disk in a secure location, because anyone using it can access your local user account
Change Web Page Font Size on the Fly
====================================
If your mouse contains a wheel for scrolling, you can change font size on the fly when viewing a Web page. To do so:
Press and hold Ctrl. Scroll down (or towards yourself) to enlarge the font size. Scroll up (or away from yourself) to reduce the font size.
You might find it useful to reduce font size when printing a Web page, so that you can fit more content on the page.
WinXP Clear Page file on shutdown
=================================
WINXPCPS.REG (WinXP Clear Page file on shutdown)
This Registration (.REG) file clears the Page file when you power off the computer.
Restart Windows for these changes to take effect!
ALWAYS BACKUP YOUR SYSTEM BEFORE MAKING ANY CHANGES!
Browse to: HKEY_LOCAL_MACHINE \ System \ CurrentControlSet \ Control \ Session Manager \ Memory Management
and add the DWORD variable "ClearPageFileAtShutdown"=dword:00000001
You can also do this without reg hacking.
Go to Control panel Administrative tools, local security policy. then go to local policies ---> security options.
Then change the option for "Shutdown: Clear Virtual Memory Pagefile"
Group Policy for Windows XP
===========================
One of the most full featured Windows XP configuration tools available is hidden right there in your system, but most people don't even know it exists. It's called the Local Group Policy Editor, or gpedit for short. To invoke this editor, select Start and then Run, then type the following:
gpedit.msc
After you hit ENTER, you'll be greeted by gpedit, which lets you modify virtually every feature in Windows XP without having to resort to regedit. Dig around and enjoy!
Forgetting What Your Files Are?
===============================
This procedure works under NTFS.
As times goes along you have a lot files on your computer. You are going to forget what they are. Well here is way to identify them as you scroll through Windows Explorer in the future.
This procedure works under NTFS.
1.. Open up a folder on your system that you want to keep track of the different files you might one to identify in the future.
2.. Under View make certain that you set it to the Details.
3.. Highlight the file you want to keep more information on. Right click the file and you will get a pop up menu. Click on properties.
4.. Click on the Summary Tab (make sure it says simple not advanced on the button in the box), You should now get the following fields,
Title,Subject, Author, Category, Keywords, Comments
You will see advanced also if you have changed it to simple, Here will be other fields you can fill in.
5.. Next you can fill in what ever field you want.
6.. After you finished click the apply button then OK.
7.. Next right click the bar above your files, under the address bar and you should get a drop down menu. Here you can click the fields you want to display.
8.. You should now see a list with the new fields and any comments you have done.
9.. Now if you want to sort these just right click a blank spot and then you sort the information to your liking.
Temporarily Assign Yourself Administrative Permissions
======================================================
Many programs require you to have Administrative permissions to be able to install them. Here is an easy way to temporarily assign yourself Administrative permissions while you remain logged in as a normal user.
Hold down the Shift key as you right-click on the program?s setup file.
Click Run as.
Type in a username and password that have Administrative permissions.
This will also work on applications in the Start menu.
Create a Shortcut to Lock Your Computer
=======================================
Leaving your computer in a hurry but you don?t want to log off? You can double-click a shortcut on your desktop to quickly lock the keyboard and display without using CTRL+ALT+DEL or a screen saver.
To create a shortcut on your desktop to lock your computer:
Right-click the desktop.
Point to New, and then click Shortcut.
The Create Shortcut Wizard opens. In the text box, type the following:
rundll32.exe user32.dll,LockWorkStation
Click Next.
Enter a name for the shortcut. You can call it "Lock Workstation" or choose any name you like.
Click Finish.
You can also change the shortcut's icon (my personal favorite is the padlock icon in shell32.dll).
To change the icon:
Right click the shortcut and then select Properties.
Click the Shortcut tab, and then click the Change Icon button.
In the Look for icons in this file text box, type:
Shell32.dll.
Click OK.
Select one of the icons from the list and then click OK
You could also give it a shortcut keystroke such CTRL+ALT+L. This would save you only one keystroke from the normal command, but it could be more convenient.
Create a Shortcut to Start Remote Desktop
=========================================
Tip: You can add a shortcut to the desktop of your home computer to quickly start Remote Desktop and connect to your office computer.
To create a shortcut icon to start Remote Desktop
Click Start, point to More Programs, point to Accessories, point to Communications, and then click on Remote Desktop Connection.
Click Options.
Configure settings for the connection to your office computer.
Click Save As, and enter a name, such as Office Computer. Click Save.
Open the Remote Desktops folder.
Right-click on the file named Office Computer, and then click Create Shortcut.
Drag the shortcut onto the desktop of your home computer.
To start Remote Desktop and connect to your office computer, double-click on the shortcut
Instantly Activate a Screen saver
================================
Turn on a screen saver without having to wait by adding a shortcut to your desktop:
Click the Start button, and then click Search.
In the Search Companion window, click All file types.
In the file name box, type *.scr
In the Look in box, choose Local Hard Drives (C or the drive where you have system files stored on your computer.
Click Search.
You will see a list of screen savers in the results. Pick a screen saver you want. You can preview it by double-clicking it.
Right click on the file, choose Send To, and then click Desktop (create shortcut).
To activate the screen saver, double-click the icon on your desktop
Add a Map Drive Button to the Toolbar
=====================================
Do you want to quickly map a drive, but can?t find the toolbar button? If you map drives often, use one of these options to add a Map Drive button to the folder toolbar.
Option One (Long Term Fix)
Click Start, click My Computer, right-click the toolbar, then unlock the toolbars, if necessary.
Right-click the toolbar again, and then click Customize.
Under Available toolbar buttons, locate Map Drive, and drag it into the position you want on the right under Current toolbar buttons.
Click Close, click OK, and then click OK again.
You now have drive mapping buttons on your toolbar, so you can map drives from any folder window. To unmap drives, follow the above procedure, selecting Disconnect under Available toolbar buttons. To quickly map a drive, try this option.
Option Two (Quick Fix)
Click Start, and right-click My Computer.
Click Map Network Drive.
If you place your My Computer icon directly on the desktop, you can make this move in only two clicks!
Software not installing?
========================
If you have a piece of software that refuses to install because it says that you are not running Windows 2000 (such as the Win2K drivers for a Mustek scanner!!) you can simply edit HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows NT/CurrentVersion/ProductName to say Microsoft Windows 2000 instead of XP and it will install. You may also have to edit the version number or build number, depending on how hard the program tries to verify that you are installing on the correct OS. I had to do this for my Mustek 600 CP scanner (compatibility mode didn't' help!!!) and it worked great, so I now have my scanner working with XP (and a tech at Mustek can now eat his words).
BTW, don't' forget to restore any changes you make after you get your software installed
You do this at your own risk.
Use your Windows Key
====================
The Windows logo key, located in the bottom row of most computer keyboards is a little-used treasure. Don't' ignore it. It is the shortcut anchor for the following commands:
Windows: Display the Start menu
Windows + D: Minimize or restore all windows
Windows + E: Display Windows Explorer
Windows + F: Display Search for files
Windows + Ctrl + F: Display Search for computer
Windows + F1: Display Help and Support Center
Windows + R: Display Run dialog box
Windows + break: Display System Properties dialog box
Windows + shift + M: Undo minimize all windows
Windows + L: Lock the workstation
Windows + U: Open Utility Manager
Windows + Q: Quick switching of users (Powertoys only)
Windows + Q: Hold Windows Key, then tap Q to scroll thru the different users on your PC
Change your CD key
==================
You don't need to re-install if you want to try the key out ... just do this:
1. Go to Activate Windows
2. Select the Telephone option
3. Click "Change Product Key"
4. Enter RK7J8-2PGYQ-P47VV-V6PMB-F6XPQ
5. Click "Update"
Now log off and log back in again. It should now show 60 days left, minus the number of days it had already counted down.
Note: If your crack de-activated REGWIZC.DLL and LICDLL.DLL, you are going to have to re-register them.
Remove the Shared Documents folders from My Computer
====================================================
One of the most annoying things about the new Windows XP user interface is that Microsoft saw fit to provide links to all of the Shared Documents folders on your system, right at the top of the My Computer window. I can't imagine why this would be the default, even in a shared PC environment at home, but what's even more annoying is that you cannot change this behavior through the sh*ll
: Those icons are stuck there and you have to live with it.
Until now, that is.
Simply fire up the Registry Editor and navigate to the following key:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \ My Computer \ NameSpace \ DelegateFolders
You'll see a sub-key named {59031a47-3f72-44a7-89c5-5595fe6b30ee}. If you delete this, all of the Shared Documents folders (which are normally under the group called "Other Files Stored on This Computer" will be gone.
You do not need to reboot your system to see the change.
Before: A cluttered mess with icons no one will ever use (especially that orphaned one). After: Simplicity itself, and the way it should be by default.
This tip For older XP builds
===================
Edit or remove the "Comments" link in window title bars
During the Windows XP beta, Microsoft has added a "Comments?" hyperlink to the title bar of each window in the system so that beta testers can more easily send in a problem report about the user interface. But for most of us, this isn't an issue, and the Comments link is simply a visual distraction. And for many programs that alter the title bar, the Comments link renders the Minimize, Maximize, and Close window buttons unusable, so it's actually a problem.
Let's get rid of it. Or, if you're into this kind of thing, you can edit it too.
Open the Registry Editor and navigate to the following keys:
My Computer \ HKEY_CURRENT_USER \ Control Panel \ Desktop \ LameButtonEnabled
My Computer \ HKEY_CURRENT_USER \ Control Panel \ Desktop \ LameButtonText
The first key determines whether the link appears at all; change its value to 0 to turn it off. The second key lets you have a little fun with the hyperlink; you can change the text to anything you'd like, such as "Paul Thurrott" or whatever.
Editing either value requires a restart before the changes take effect.
Before: An unnecessary hyperlink. Have some fun with it! Or just remove it entirely. It's up to you.
Rip high-quality MP3s in Windows Media Player 8
================================================
The relationship between Windows Media Player 8 and the MP3 audio format is widely misunderstood. Basically, WMP8 will be able to playback MP3 files, but encoding (or "ripping" CD audio into MP3 format will require an MP3 plug-in. So during the Windows XP beta, Microsoft is supplying a sample MP3 plug-in for testing purposes, but it's limited to 56 Kbps rips, which is pretty useless. However, if you have an externally installed MP3 codec, you can use WMP8 to rip at higher bit rates. But you'll have to edit the Registry to make this work.
Fire up the Registry Editor and navigate to the following key:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ MediaPlayer \ Settings \ MP3Encoding
Here, you'll see sub-keys for LowRate and LowRateSample, which of course equates to the single 56 Kbps sample rate you see in WMP8. To get better sampling rates, try adding the following keys (Using New then DWORD value):
"LowRate" = DWORD value of 0000dac0
"MediumRate" = DWORD value of 0000fa00
"MediumHighRate" = DWORD value of 0001f400
"HighRate" = DWORD value of 0002ee00
Now, when you launch WMP8 and go into Tools, then Options, then Copy Music, you will have four encoding choices for MP3: 56 Kbps, 64 Kbps, 128 Kbps, and 192 Kbps. Note that you will not get higher bit rate encoding unless you have installed an MP3 codec separately; the version in Windows Media Player 8 is limited to 56 Kbps only.
Find the appropriate location in the Registry... ...add a few DWORD values... ...And then you'll be ripping CDs in higher-quality MP3 format!
Speed up the Start Menu
=======================
The default speed of the Start Menu is pretty slow, but you can fix that by editing a Registry Key. Fire up the Registry Editor and navigate to the following key:
HKEY_CURRENT_USER \ Control Panel \ Desktop \ MenuShowDelay
By default, the value is 400. Change this to a smaller value, such as 0, to speed it up.
Speed up the Start Menu (Part two)
==================================
If your confounded by the slow speed of the Start Menu, even after using the tip above, then you might try the following: Navigate to Display Properties then Appearance then Advanced and turn off the option titled Show menu shadow . You will get much better overall performance.
Speed up Internet Explorer 6 Favorites
======================================
For some reason, the Favorites menu in IE 6 seems to slow down dramatically sometimes--I've noticed this happens when you install Tweak UI 1.33, for example, and when you use the preview tip to speed up the Start menu. But here's a fix for the problem that does work, though it's unclear why:
Just open a command line window (Start button -> Run -> cmd) and type sfc, then hit ENTER. This command line runs the System File Checker, which performs a number of services, all of which are completely unrelated to IE 6. But there you go: It works.
Do an unattended installation
=============================
The Windows XP Setup routine is much nicer than that in Windows 2000 or Windows Me, but it's still an hour-long process that forces you to sit in front of your computer for an hour, answering dialog boxes and typing in product keys. But Windows XP picks up one of the more useful features from Windows 2000, the ability to do an unattended installation, so you can simply prepare a script that will answer all those dialogs for you and let you spend some quality time with your family.
I've written about Windows 2000 unattended installations and the process is pretty much identical on Windows XP, so please read that article carefully before proceeding. And you need to be aware that this feature is designed for a standalone Windows XP system: If you want to dual-boot Windows XP with another OS, you're going to have to go through the interactive Setup just like everyone else: An unattended install will wipe out your hard drive and install only Windows XP, usually.
To perform an unattended installation, you just need to work with the Setup Manager, which is located on the Windows XP CD-ROM in D:\SupportTools\DEPLOY.CAB by default: Extract the contents of this file and you'll find a number of useful tools and help files; the one we're interested in is named setupmgr.exe. This is a very simple wizard application that will walk you through the process of creating an answer file called winnt.sif that can be used to guide Windows XP Setup through the unattended installation.
One final tip: There's one thing that Setup Manager doesn't add: Your product key. However, you can add this to the unattend.txt file manually. Simply open the file in Notepad and add the following line under the [UserData] section:
ProductID=RK7J8-2PGYQ-P47VV-V6PMB-F6XPQ
(This is a 60 day CD key)
Then, just copy winnt.sif to a floppy, put your Windows XP CD-ROM in the CD drive, and reboot: When the CD auto-boots, it will look for the unattend.txt file in A: automatically, and use it to answer the Setup questions if it's there.
Finally, please remember that this will wipe out your system! Back up first, and spend some time with the help files in DEPLOY.CAB before proceeding.
For Older builds or not using setupreg.hiv file
===============================================
Remove the Desktop version text
During the Windows XP beta, you will see text in the lower right corner of the screen that says Windows XP Professional, Evaluation Copy. Build 2462 or similar. A lot of people would like to remove this text for some reason, and while it's possible to do so, the cure is more damaging than the problem, in my opinion. So the following step will remove this text, but you'll lose a lot of the nice graphical effects that come in Windows XP, such as the see-through icon text.
To remove the desktop version text, open Display Properties (right-click the desktop, then choose Properties) and navigate to the Desktop page. Click Customize Desktop and then choose the Web page in the resulting dialog. On this page, check the option titled Lock desktop items. Click OK to close the dialog, and then OK to close Display Properties. The text disappears. But now the rest of your system is really ugly. You can reverse the process by unchecking Lock desktop items.
There's also a shortcut for this process: Just right-click the desktop and choose Arrange by then Lock Web Icons on the Desktop.
--------------------------------------------------------------------------------
Enable ClearType on the Welcome Screen!
=======================================
As laptop users and other LCD owners are quickly realizing, Microsoft's ClearType technology in Windows XP really makes a big difference for readability. But the this feature is enabled on a per-user basis in Windows XP, so you can't see the effect on the Welcome screen; it only appears after you logon.
But you can fix that. Fire up the Registry Editor and look for the following keys:
(default user) HKEY_USERS \ .Default \ Control Panel \ Desktop \ FontSmoothing (String Value)
HKEY_USERS \ .Default \ Control Panel \ Desktop \ FontSmoothingType (Hexadecimal DWORD Value)
Make sure both of these values are set to 2 and you'll have ClearType enabled on the Welcome screen and on each new user by default.
Stop Windows Messenger from Auto-Starting
=========================================
If you're not a big fan of Windows Messenger simply delete the following Registry Key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run\MSMSGS
Display Hibernate Option on the Shut Down dialog
================================================
For some reason, Hibernate may not be available from the default Shut Down dialog. But you can enable it simply enough, by holding down the SHIFT key while the dialog is visible. Now you see it, now you don't!
Add album art to any music folder
=================================
One of the coolest new features in Windows XP is its album thumbnail generator, which automatically places the appropriate album cover art on the folder to which you are copying music (generally in WMA format). But what about those people that have already copied their CDs to the hard drive using MP3 format? You can download album cover art from sites such as cdnow.com or amguide.com, and then use the new Windows XP folder customize feature to display the proper image for each folder. But this takes time--you have to manually edit the folder properties for every single folder--and you will lose customizations if you have to reinstall the OS. There's an excellent fix, however.
When you download the album cover art from the Web, just save the images as folder.jpg each time and place them in the appropriate folder. Then, Windows XP will automatically use that image as the thumbnail for that folder and, best of all, will use that image in Windows Media Player for Windows XP (MPXP) if you choose to display album cover art instead of a visualization. And the folder customization is automatic, so it survives an OS reinstallation as well. Your music folders never looked so good!
Album cover art makes music folder thumbnails look better than ever!
Change the location of the My Music or My Pictures folders
======================================================
In Windows 2000, Microsoft added the ability to right-click the My Documents folder and choose a new location for that folder in the shell
. With Windows XP, Microsoft has elevated the My Music and My Pictures folders to the same "special shell folder" status of My Documents, but they never added a similar (and simple) method for changing those folder's locations. However, it is actually pretty easy to change the location of these folders, using the following method.
Open a My Computer window and navigate to the location where you'd like My Music (or My Pictures) to reside. Then, open the My Documents folder in a different window. Drag the My Music (or My Pictures) folder to the other window, and Windows XP will update all of the references to that folder to the new location, including the Start menu.
Or use Tweak UI
Add/Remove optional features of Windows XP
==========================================
To dramatically expand the list of applications you can remove from Windows XP after installation, navigate to C:\WINDOWS\inf (substituting the correct drive letter for your version of Windows) and open the sysoc.inf file. Under Windows XP Professional Edition RC1, this file will resemble the following by default:
[Version] Signature = "$Windows NT$"
DriverVer=06/26/2001,5.1.2505.0
[Components]
NtComponents=ntoc.dll,NtOcSetupProc,,4
WBEM=ocgen.dll,OcEntry,wbemoc.inf,hide,7
Display=desk.cpl,DisplayOcSetupProc,,7
Fax=fxsocm.dll,FaxOcmSetupProc,fxsocm.inf,,7
NetOC=netoc.dll,NetOcSetupProc,netoc.inf,,7
iis=iis.dll,OcEntry,iis.inf,,7
com=comsetup.dll,OcEntry,comnt5.inf,hide,7
dtc=msdtcstp.dll,OcEntry,dtcnt5.inf,hide,7
IndexSrv_System = setupqry.dll,IndexSrv,setupqry.inf,,7
TerminalServer=TsOc.dll, HydraOc, TsOc.inf,hide,2
msmq=msmqocm.dll,MsmqOcm,msmqocm.inf,,6
ims=imsinsnt.dll,OcEntry,ims.inf,,7
fp_extensions=fp40ext.dll,FrontPage4Extensions,fp40ext.inf,,7
AutoUpdate=ocgen.dll,OcEntry,au.inf,hide,7
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
msnexplr=ocmsn.dll,OcEntry,msnmsn.inf,,7
smarttgs=ocgen.dll,OcEntry,msnsl.inf,,7
RootAutoUpdate=ocgen.dll,OcEntry,rootau.inf,,7
Games=ocgen.dll,OcEntry,games.inf,,7
AccessUtil=ocgen.dll,OcEntry,accessor.inf,,7
CommApps=ocgen.dll,OcEntry,communic.inf,HIDE,7
MultiM=ocgen.dll,OcEntry,multimed.inf,HIDE,7
AccessOpt=ocgen.dll,OcEntry,optional.inf,HIDE,7
Pinball=ocgen.dll,OcEntry,pinball.inf,HIDE,7
MSWordPad=ocgen.dll,OcEntry,wordpad.inf,HIDE,7
ZoneGames=zoneoc.dll,ZoneSetupProc,igames.inf,,7
[Global]
WindowTitle=%WindowTitle%
WindowTitle.StandAlone="*"
The entries that include the text hide or HIDE will not show up in Add/Remove Windows Components by default. To fix this, do a global search and replace for ,hide and change each instance of this to , (a comma). Then, save the file, relaunch Add/Remove Windows Components, and tweak the installed applications to your heart's content.
Cool, eh? There are even more new options now under "Accessories and Utilities" too.
Remove Windows Messenger
========================
It seems that a lot of people are interested in removing Windows Messenger for some reason, though I strongly recommend against this: In Windows XP, Windows Messenger will be the hub of your connection to the .NET world, and now that this feature is part of Windows, I think we're going to see a lot of .NET Passport-enabled Web sites appearing as well. But if you can't stand the little app, there are a couple of ways to get rid of it, and ensure that it doesn't pop up every time you boot into XP. The best way simply utilizes the previous tip:
If you'd like Windows Messenger to show up in the list of programs you can add and remove from Windows, navigate to C:\WINDOWS\inf (substituting the correct drive letter for your version of Windows) and open sysoc.inf (see the previous tip for more information about this file). You'll see a line that reads:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
Change this to the following and Windows Messenger will appear in Add or Remove Programs, then Add/Remove Windows Components, then , and you can remove it for good:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,7
Autolog On tip for XP
real easy and straight forward.
1. click on "Start" - then click on "Run" - type "control userpasswords2"
2. click OK
3. On the Users tab, clear the "Users must enter a user name and password to
use this computer" check box.
4. A dialog will appear that asks you what user name and password should be used to logon automatically.
Your all set.
Aspi
WinXP does not come with an Aspi layer. So far almost 90% of the problems with winXP and CD burning software are Aspi layer problems. After installing winXP, before installing any CD burning software do a few things first:
1. Open up "My computer" and right click on the CD Recorder. If your CD recorder was detected as a CD recorder there will be a tab called "Recording". On this tab uncheck ALL of the boxes. apply or OK out of it and close my computer.
2. Next install the standard Aspi layer for NT. Reboot when asked.
Thats is. after the reboot you can install any of the currently working CD recording applications with no problems. If using CD Creator do not install direct CD or Take two as they are currently incompatible but Roxio has promised a fix as soon as XP is released.
Print Dir
XP alas does not include a way to print a directory listing aside from using the command prompt. I talking about a right click on the directory and print the files names on the printer type of Dir print. So I guess we will need to add one - start up regedit and add the following
[HKEY_CLASSES_ROOT\Folder\shell\print\command]
@="command.com /c dir %1 > PRN"
[HKEY_CLASSES_ROOT\Folder\shell\print\command]
@="command.com /c dir %1 > dirprnt.txt"
Right click on a folder in windows explorer and choose "print". The contents of the folder will appear in a file called dirprnt.txt in the folder. open the file and print it out. If you want to print directly to the printer remove the second line containing "dirprnt.txt"
Rename Multiple files
A new, small, neat feature for winXP deals with renaming files. I personally have always wanted the OS to include a way to do a mass file renaming on a bunch of files. You can now rename multiple files at once in WinXP. Its real simple:
1. Select several files in Explorer, press F2 and rename one of those files to
something else. All the selected files get renamed to the new file name (plus a number added to the end).
2. thats it. Simple huh.
I would recommend that you only have the files you want to rename in the directory your working in. I would also recommend that until you get used to this neat little trick that you save copies of the files in a safe location while your getting the hang of it.
Handy for renaming those mass amounts of porn pics you d/l from the web
Use Window Blinds XP to add themes
Windows Blinds XP has been integrated into the Windows XP operating system. Microsoft and Stardock have entered into a partnership in which Microsoft will use their technology in the Windows XP operating system. With Windows Blinds XP installed you have additional styles to choose from in display properties.
And the best part is you can download over 1000 different styles and even make your own very easily with the SDK.
To get started you need to download the Windows Blinds XP extension: www.stardock.com/files/wbxp-b5_private.exe to download the latest beta
Note: You must register at http://scripting.stardock.com/customer/wbxp_beta.asp to be able to legally download the Windows Blinds XP beta. Once you register they will even e-mail you when new builds are available for download.
Once downloaded, install the program and you will notice the extra styles in the display properties when you run the program.
To download more styles www.wincustomize.com/index.asp and select windows blinds on the menu on the left.
Show file extensions
Ever wonder where you file extensions went? Working with files when you can not tell what the file extension can be a huge pain in the butt. Thankfully, MS has made it possible for all file names with the extensions to be shown.
In any folder that contains files. Click on the tools menu and select folder options.
Then click on the view tab.
Locate where it lists Hide extensions of known file types and uncheck it.
Click OK.
XP memory tweaks
Below are some Windows XP memory tweaks. They are located in the windows registry at: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management
DisablePagingExecutive - When enabled, this setting will prevent the paging of the Win2k Executive files to the hard drive, causing the OS and most programs to be more responsive. However, it is advised that people should only perform this tweak if they have a significant amount of RAM on their system (more than 128 MB), because this setting does use a substantial portion of your system resources. By default, the value of this key is 0. To enable it, set it to 1.
LargeSystemCache - When enabled (the default on Server versions of Windows 2000), this setting tells the OS to devote all but 4 MB of system memory (which is left for disk caching) to the file system cache. The main effect of this is allowing the computer to cache the OS Kernel to memory, making the OS more responsive. The setting is dynamic and if more than 4 MB is needed from the disk cache for some reason, the space will be released to it. By default, 8MB is earmarked for this purpose. This tweak usually makes the OS more responsive. It is a dynamic setting, and the kernel will give up any space deemed necessary for another application (at a performance hit when such changes are needed). As with the previous key, set the value from 0 to 1 to enable. Note that in doing this, you are consuming more of your system RAM than normal. While LargeSystemCache will cut back usage when other apps need more RAM, this process can impede performance in certain intensive situations. According to Microsoft, the "[0] setting is recommended for servers running applications that do their own memory caching, such as Microsoft SQL Server, and for applications that perform best with ample memory, such as Internet Information Services."
IOPageLockLimit - This tweak is of questionable value to people that aren't running some kind of server off of their computer, but we will include it anyway. This tweak boosts the Input/Output performance of your computer when it is doing a large amount of file transfers and other similar operations. This tweak won't do much of anything for a system without a significant amount of RAM (if you don't have more than 128 MB, don't even bother), but systems with more than 128 MB of RAM will generally find a performance boost by setting this to between 8 and 16 MB. The default is 0.5 MB, or 512 KB. This setting requires a value in bytes, so multiply the desired number of megabytes * 1024 * 1024. That's X * 1048576 (where X is the number, in megabytes). Test out several settings and keep the one which seems to work best for your system.
Tuesday, February 23, 2010
Missing Administrator Account
Once you have created regular user accounts, the default Administrator account vanishes from the Welcome screen, which you see when the computer starts up. Press Ctrl-Alt-Delete twice at the Welcome screen to retrieve the standard logon dialog. You can log on as Administrator from here. To switch among accounts, just click the Log Off button on the Start menu. You'll then see the Log Off Windows dialog box. Click the Switch User button, and you'll be taken to the Welcome screen where you can select and log on to other accounts.
Monday, February 22, 2010
Misc Linux Tips & Tricks
Tips
Speeding up your hard drive (#1)
Get faster file transfer by using 32-bit transfers on your hard drive
Just add the line:
hdparm -c3 /dev/hdX
to a bootup script.
If you use SuSE or other distros based on SYS V,
/sbin/init.d/boot.local
should work for you.
This enables 32-bit transfer on your hard drive. On some systems it can improve transfer performance by 75%.
To test your performance gain, type:
hdparm -t -T /dev/hdX
Protecting yourself from being a spam base(#2)
Sendmail allows for someone to telnet to port 25 and do an expn (expand) to see what users and aliases are on your machine. Also, vrfy (verify) means someone can get legal e-mail addresses from your box and send spam through your machine.
Don't want that, so look in your /etc/sendmail.cf file for a line that looks like this:
###############
# Options #
###############
Now cut and paste these next few lines below that:
# turning off the expand option and requiring a helo from
# a remote computer
Opnoexpn,novrfy,needmailhelo
Now there is no expansion, no verify, and sendmail requires a helo with a legitimate DNS in order to use the mailer.
Then look in your /etc/mail/aliases file and ensure you have only your own boxen and/or subnet in there as OK or RELAY. That will help cut down on spammers' ability to find relay machines to do their dirty work for them.
Cleaning up Netscape crashes(#3)
You have a tip about Netscape leaving copies of itself running below, but you can make a general shell script to clean up a Netscape crash like this:
#!/bin/sh
#kill.netscape
killall -9 netscape
rm ~/.netscape/lock
Then all your users can use it and clean up the dreaded hundred instances of Netscape running when it crashed. Change netscape to netscape-communicator or netscape-navigator as appropriate
More DOS-like commands(#4)
Many people are moving to Linux because they miss the stability of good old DOS. In that light, many users are typing DOS commands (which originated from UNIX in the first place) that look fine but cause errors. The command "cd.." in DOS is perfectly valid, but Linux balks. This is because "cd" is a command, and any parameter for that command must be separated from the command by a space. The same goes for "cd/" and "cd~". A quick fix is here.
Use your favorite text editor in your home directory to edit the file ".bashrc". The period is there on purpose, this hides the file from normal ls display.
Add the lines:
alias cd/="cd /"
alias cd~="cd ~"
alias cd..="cd .."
And I usually add these...
alias md="mkdir"
alias rd="rmdir -i"
alias rm="rm -i"
and my first and still favorite alias...
alias ls="ls --color"
alias is a powerful tool, and can be used in the .bashrc script as well as from the command line. You can, if you want to spend the time, create your own group of shell commands to suit how you work. As long as you put them in your .bashrc file, they'll be there everytime you log in. Note that if you frequently log in as root, you might want to copy /home/username/.bashrc to /root/.bashrc to keep yourself sane.
Resurrecting corrupted floppies(#5)
Here's how to make a floppy disk with "track-0 bad" reusable again:
If the track zero of a floppy disk is found to be bad, no DOS or Windows utility is going to do anything about it--you just have to throw it in your unrecycle bin.
This tip cannot recover the data, but can make the disk carry things again, at least for the time being (moments of desperation).
How to:
(A) Format the disk with Linux. Build a Linux file system (don't use mformat). I did this some time before by invoking the makebootdisk command (in Slakware) and stopped after the formatting was over. There should be better ways to do it in RedHat 5.2 or other recent versions.
( Reformat the disk with Windows. Use the DOS window and the /u option while formatting.
Using DOS-like commands(#6)
There's a package called mtools which is included with most of the distributions out there.
There are several commands for basic DOS stuff. For example, to directory the floppy drive, type mdir a:. This is rather handy--you don't need to mount the floppy drive to use it.
Other commands are: mattrib , mcd, mcopy, mdel, mformat, mlabel, mren (rename), mmd, mrd, and mtype.
This doesn't work for reading from hard disks. In that case, you would add entries to /etc/fstab, drive type msdos for fat16 partitions, and vfat for fat32.
Copying files from Linux to Windows 98 or 95B (FAT32)(#7)
It's as easy as installing the program explore2fs. It uses a Windows Explorer interface and supports drag-and-drop. I have found it reliable and useful for migrating files from my RedHat 6.1 partition to my Win95B partition quickly and with a minimum of fuss.
It's available free--as all software should be--from this URL:
CODE
http://uranus.it.swin.edu.au/~jn/linux/explore2fs.htm
Installing in partitions(#8)
I am using SuSE Linux, which has some interesting options (I don't know if RedHat or other distributions offer you this, too).
1. You can install Linux on a single file in your Windows Partition. Nice to try it out, but I guess it is not that fast then. You can load it then with a DOS program, loadlin.
2. Use Fips or Partition Magic. Defragment your hard drive (you should do this for Point 1, too) and split it up. I guess most users just have one partition, which you should split up into at least three: one for the Linux files, and a smaller swap partition (take about 32 to 64 MB, depending on your RAM--less RAM needs bigger swap partitions). If you decide later to deinstall Linux you can always delete both partitions and create one big one for Windows again.
Fips is a stupid command line program, but if you're too lazy to read at least a little bit, then you should stop thinking about Linux anyway...
Command Pipelines(#9)
Pipes are easy. The Unix shells provide mechanisms which you can use them to allow you to generate remarkably sophisticated `programs' out of simple components. We call that a pipeline. A pipeline is composed of a data generator, a series of filters, and a data consumer. Often that final stage is as simple as displaying the final output on stdout, and sometimes the first stage is as simple as reading from stdin. I think all shells use the "|" character to separate each stage of a pipeline. So:
data-generator | filter | ... | filter | data-consumer
Each stage of the pipeline runs in parallel, within the limits which the system permits. Hey, look closely, because that last phrase is important. Are you on a uni-processor system because if you are, then obviously only one process runs at a time, although that point is simply nitpicking. But pipes are buffers capable of holding only finite data. A process can write into a pipe until that pipe is full. When the pipe is full the process writing into it blocks until some of the data already in the pipe has been read. Similarly, a process can read from a pipe until that pipe is empty. When it's empty the reading process is blocked until some more data has been written into the pipe.
What is IP masquerading and when is it of use?(#10)
IP masquerading is a process where one computer acts as an IP gateway for a network. All computers on the network send their IP packets through the gateway, which replaces the source IP address with its own address and then forwards it to the internet. Perhaps the source IP port number is also replaced with another port number, although that is less interesting. All hosts on the internet see the packet as originating from the gateway.
Any host on the Internet which wishes to send a packet back, ie in reply, must necessarily address that packet to the gateway. Remember that the gateway is the only host seen on the internet. The gateway rewrites the destination address, replacing its own address with the IP address of the machine which is being masqueraded, and forwards that packet on to the local network for delivery.
This procedure sounds simple, and it is. It provides an effective means by which you can provide second class internet connections for a complete LAN using only one (internet) IP address.
Setting UTC or local time(#11)
When Linux boots, one of the initialisation scripts will run the /sbin/hwclock program to copy the current hardware clock time to the system clock. hwclock will assume the hardware clock is set to local time unless it is run with the --utc switch. Rather than editing the startup script, under Red Hat Linux you should edit the /etc/sysconfig/clock file and change the ``UTC'' line to either ``UTC=true'' or ``UTC=false'' as appropriate.
Setting the system clock(#12)
To set the system clock under Linux, use the date command. As an example, to set the current time and date to July 31, 11:16pm, type ``date 07312316'' (note that the time is given in 24 hour notation). If you wanted to change the year as well, you could type ``date 073123161998''. To set the seconds as well, type ``date 07312316.30'' or ``date 073123161998.30''. To see what Linux thinks the current local time is, run date with no arguments.
Setting the hardware clock(#13)
To set the hardware clock, my favourite way is to set the system clock first, and then set the hardware clock to the current system clock by typing ``/sbin/hwclock --systohc'' (or ``/sbin/hwclock --systohc --utc'' if you are keeping the hardware clock in UTC). To see what the hardware clock is currently set to, run hwclock with no arguments. If the hardware clock is in UTC and you want to see the local equivalent, type ``/sbin/hwclock --utc''
Setting your timezone(#14)
The timezone under Linux is set by a symbolic link from /etc/localtime[1] to a file in the /usr/share/zoneinfo[2] directory that corresponds with what timezone you are in. For example, since I'm in South Australia, /etc/localtime is a symlink to /usr/share/zoneinfo/Australia/South. To set this link, type:
ln -sf ../usr/share/zoneinfo/your/zone /etc/localtime
Replace your/zone with something like Australia/NSW or Australia/Perth. Have a look in the directories under /usr/share/zoneinfo to see what timezones are available.
[1] This assumes that /usr/share/zoneinfo is linked to /etc/localtime as it is under Red Hat Linux.
[2] On older systems, you'll find that /usr/lib/zoneinfo is used instead of /usr/share/zoneinfo. See also the later section ``The time in some applications is wrong''.
Zombies(#15)
What are these zombie processes that show up in ps? I kill them but they don't go away!
Zombies are dead processes. You cannot kill the dead. All processes eventually die, and when they do they become zombies. They consume almost no resources, which is to be expected because they are dead! The reason for zombies is so the zombie's parent (process) can retrieve the zombie's exit status and resource usage statistics. The parent signals the operating system that it no longer needs the zombie by using one of the wait() system calls.
When a process dies, its child processes all become children of process number 1, which is the init process. Init is ``always'' waiting for children to die, so that they don't remain as zombies.
If you have zombie processes it means those zombies have not been waited for by their parent (look at PPID displayed by ps -l). You have three choices: Fix the parent process (make it wait); kill the parent; or live with it. Remember that living with it is not so hard because zombies take up little more than one extra line in the output of ps.
How do i give users an ftp only account (no telnet, etc).(#16)
give them shell which doesn't work, but is listed in /etc/shells
for example /bin/false...
How to do backup with tar?(#17)
You can mantain a list of files that you with to backup into a file and tar
it when you wish.
tar czvf tarfile.tar.gz -T list_file
where list_file is a simple list of what you want to include into the tar
i.e:
/etc/smb.conf
/root/myfile
/etc/ppp (all files into the /etc/ppp directory)
/opt/gnome/html/gnome-dev-info.html
How to keep a computer from answering to ping?(#18)
a simple "echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all" will do the
trick... to turn it back on, simply
"echo 0 > /proc/sys/net/ipv4/icmp_echo_ignore_all"
Customizing your directory colors.(#19)
I know a lot of you know the command ls --color. Which displays your directory with colors. But, a lot of people may not know that those colors are customizable. All you need to do is add the following line to your /etc/bashrc file.
eval `dircolors /etc/DIR_COLORS`
And then all of the color configuration can be found in the file /etc/DIR_COLORS
Frozen Xwindow(#20)
If your Xwindow freezes sometimes, here are two ways that you may try to kill your server. The first is the simple simple way of killing your X server the key combination: Ctrl+Alt+Backspace
The second way is a little more complicated, but it works most of the time. Hit Ctrl+Alt+F2 to startup a virtual console, then log in with your user name and password and run:
# ps -ax | grep startx
This will give you the PID of your Xserver. Then just kill it with:
# kill -9 PID_Number
To go back to your first console, just hit Alt-F1
Converting all files in a directory to lowercase.(#21)
#!/bin/sh
# lowerit
# convert all file names in the current directory to lower case
# only operates on plain files--does not change the name of directories
# will ask for verification before overwriting an existing file
for x in `ls`
do
if [ ! -f $x ]; then
continue
fi
lc=`echo $x | tr '[A-Z]' '[a-z]'`
if [ $lc != $x ]; then
mv -i $x $lc
fi
done
Wow. That's a long script. I wouldn't write a script to do that; instead, I would use this command:
for i in * ; do [ -f $i ] && mv -i $i `echo $i | tr '[A-Z]' '[a-z]'`;
done;
on the command line.
Script to view those compressed HOWTOs.(#22)
From a newbie to another, here is a short script that eases looking for and viewing howto documents. My howto's are in /usr/doc/faq/howto/ and are gzipped. The file names are XXX-HOWTO.gz, XXX being the subject. I created the following script called "howto" in the /usr/local/sbin directory:
#!/bin/sh
if [ "$1" = "" ]; then
ls /usr/doc/faq/howto | less
else
gunzip -c /usr/doc/faq/howto/$1-HOWTO.gz | less
fi
When called without argument, it displays a directory of the available howto's. Then when entered with the first part of the file name (before the hyphen) as an argument, it unzips (keeping the original intact) then displays the document.
For instance, to view the Serial-HOWTO.gz document, enter:
$ howto Serial
Util to clean up your logfiles.(#23)
If you're like me, you have a list with 430 subscribers, plus 100+ messages per day coming in over UUCP. Well, what's a hacker to do with these huge logs? Install chklogs, that's what. Chklogs is written by Emilio Grimaldo, grimaldo@panama.iaehv.nl, and the current version 1.8 available from ftp.iaehv.nl:/pub/users/grimaldo/chklogs-1.8.tar.gz. It's pretty self explanatory to install(you will, of course, check out the info in the doc subdirectory). Once you've got it installed, add a crontab entry like this:
# Run chklogs at 9:00PM daily.
00 21 * * * /usr/local/sbin/chklogs -m
Handy Script to Clean Up Corefiles.(#24)
Create a file called rmcores(the author calls it handle-cores) with the following in it:
#!/bin/sh
USAGE="$0 "
if [ $# != 2 ] ; then
echo $USAGE
exit
fi
echo Deleting...
find $1 -name core -atime 7 -print -type f -exec rm {} \;
echo e-mailing
for name in `find $1 -name core -exec ls -l {} \; | cut -c16-24`
do
echo $name
cat $2 | mail $name
done
And have a cron job run it every so often.
Moving directories between filesystems.Quick way to move an entire tree of files from one disk to another (#25)
(cd /source/directory && tar cf - . ) | (cd /dest/directory && tar xvfp -)
[ Change from cd /source/directory; tar....etc. to prevent possibility of trashing directory in case of disaster.]
Finding out which directories are the largest.Ever wondered which directories are the biggest on your computer? Here's how to find out.(#26)
du -S | sort -n
How do I stop my system from fscking on each reboot?(#27)
When you rebuild the kernel, the filesystem is marked as 'dirty' and so your disk will be checked with each boot. The fix is to run:
rdev -R /zImage 1
This fixes the kernel so that it is no longer convinced that the filesystem is dirty.
Note: If using lilo, then add read-only to your linux setup in your lilo config file (Usually /etc/lilo.conf)
How to avoid fscks caused by "device busy" at reboot time.(#28)
If you often get device busy errors on shutdown that leave the filesystem in need of an fsck upon reboot, here is a simple fix:
To /etc/rc.d/init.d/halt or /etc/rc.d/rc.0, add the line
mount -o remount,ro /mount.dir
for all your mounted filesystems except /, before the call to umount -a. This means if, for some reason, shutdown fails to kill all processes and umount the disks they will still be clean on reboot. Saves a lot of time at reboot for me.
How to find the biggest files on your hard-drive.(#29)
ls -l | sort +4n
Or, for those of you really scrunched for space this takes awhile but works great:
cd /
ls -lR | sort +4n
A script for cleaning up after programs that create autosave and backup files.(#30)
Here is a simple two-liner which recursively descends a directory hierarchy removing emacs auto-save (#) and backup (~) files, .o files, and TeX .log files. It also compresses .tex files and README files. I call it 'squeeze' on my system.
#!/bin/sh
#SQUEEZE removes unnecessary files and compresses .tex and README files
#By Barry tolnas, tolnas@sun1.engr.utk.edu
#
echo squeezing $PWD
find $PWD \( -name \*~ -or -name \*.o -or -name \*.log -or -name \*\#\) -exec
rm -f {} \;
find $PWD \( -name \*.tex -or -name \*README\* -or -name \*readme\* \) -exec gzip -9 {} \;
How to find out what process is eating the most memory.(#31)
ps -aux | sort +4n
-OR-
ps -aux | sort +5n
How do I find which library in /usr/lib holds a certain function?(#32)
What if you're compiling and you've missed a library that needed linking in? All gcc reports are function names... Here's a simple command that'll find what you're looking for:
for i in *; do echo $i:;nm $i|grep tgetnum 2>/dev/null;done
Where tgetnum is the name of the function you're looking for.
I compiled a small test program in C, but when I run it, I get no output!(#32)
You probably compiled the program into a binary named test, didn't you? Linux has a program called test, which tests if a certain condition is true, it never produces any output on the screen. Instead of just typing test, try: ./test
Speeding up your hard drive (#1)
Get faster file transfer by using 32-bit transfers on your hard drive
Just add the line:
hdparm -c3 /dev/hdX
to a bootup script.
If you use SuSE or other distros based on SYS V,
/sbin/init.d/boot.local
should work for you.
This enables 32-bit transfer on your hard drive. On some systems it can improve transfer performance by 75%.
To test your performance gain, type:
hdparm -t -T /dev/hdX
Protecting yourself from being a spam base(#2)
Sendmail allows for someone to telnet to port 25 and do an expn (expand) to see what users and aliases are on your machine. Also, vrfy (verify) means someone can get legal e-mail addresses from your box and send spam through your machine.
Don't want that, so look in your /etc/sendmail.cf file for a line that looks like this:
###############
# Options #
###############
Now cut and paste these next few lines below that:
# turning off the expand option and requiring a helo from
# a remote computer
Opnoexpn,novrfy,needmailhelo
Now there is no expansion, no verify, and sendmail requires a helo with a legitimate DNS in order to use the mailer.
Then look in your /etc/mail/aliases file and ensure you have only your own boxen and/or subnet in there as OK or RELAY. That will help cut down on spammers' ability to find relay machines to do their dirty work for them.
Cleaning up Netscape crashes(#3)
You have a tip about Netscape leaving copies of itself running below, but you can make a general shell script to clean up a Netscape crash like this:
#!/bin/sh
#kill.netscape
killall -9 netscape
rm ~/.netscape/lock
Then all your users can use it and clean up the dreaded hundred instances of Netscape running when it crashed. Change netscape to netscape-communicator or netscape-navigator as appropriate
More DOS-like commands(#4)
Many people are moving to Linux because they miss the stability of good old DOS. In that light, many users are typing DOS commands (which originated from UNIX in the first place) that look fine but cause errors. The command "cd.." in DOS is perfectly valid, but Linux balks. This is because "cd" is a command, and any parameter for that command must be separated from the command by a space. The same goes for "cd/" and "cd~". A quick fix is here.
Use your favorite text editor in your home directory to edit the file ".bashrc". The period is there on purpose, this hides the file from normal ls display.
Add the lines:
alias cd/="cd /"
alias cd~="cd ~"
alias cd..="cd .."
And I usually add these...
alias md="mkdir"
alias rd="rmdir -i"
alias rm="rm -i"
and my first and still favorite alias...
alias ls="ls --color"
alias is a powerful tool, and can be used in the .bashrc script as well as from the command line. You can, if you want to spend the time, create your own group of shell commands to suit how you work. As long as you put them in your .bashrc file, they'll be there everytime you log in. Note that if you frequently log in as root, you might want to copy /home/username/.bashrc to /root/.bashrc to keep yourself sane.
Resurrecting corrupted floppies(#5)
Here's how to make a floppy disk with "track-0 bad" reusable again:
If the track zero of a floppy disk is found to be bad, no DOS or Windows utility is going to do anything about it--you just have to throw it in your unrecycle bin.
This tip cannot recover the data, but can make the disk carry things again, at least for the time being (moments of desperation).
How to:
(A) Format the disk with Linux. Build a Linux file system (don't use mformat). I did this some time before by invoking the makebootdisk command (in Slakware) and stopped after the formatting was over. There should be better ways to do it in RedHat 5.2 or other recent versions.
( Reformat the disk with Windows. Use the DOS window and the /u option while formatting.
Using DOS-like commands(#6)
There's a package called mtools which is included with most of the distributions out there.
There are several commands for basic DOS stuff. For example, to directory the floppy drive, type mdir a:. This is rather handy--you don't need to mount the floppy drive to use it.
Other commands are: mattrib , mcd, mcopy, mdel, mformat, mlabel, mren (rename), mmd, mrd, and mtype.
This doesn't work for reading from hard disks. In that case, you would add entries to /etc/fstab, drive type msdos for fat16 partitions, and vfat for fat32.
Copying files from Linux to Windows 98 or 95B (FAT32)(#7)
It's as easy as installing the program explore2fs. It uses a Windows Explorer interface and supports drag-and-drop. I have found it reliable and useful for migrating files from my RedHat 6.1 partition to my Win95B partition quickly and with a minimum of fuss.
It's available free--as all software should be--from this URL:
CODE
http://uranus.it.swin.edu.au/~jn/linux/explore2fs.htm
Installing in partitions(#8)
I am using SuSE Linux, which has some interesting options (I don't know if RedHat or other distributions offer you this, too).
1. You can install Linux on a single file in your Windows Partition. Nice to try it out, but I guess it is not that fast then. You can load it then with a DOS program, loadlin.
2. Use Fips or Partition Magic. Defragment your hard drive (you should do this for Point 1, too) and split it up. I guess most users just have one partition, which you should split up into at least three: one for the Linux files, and a smaller swap partition (take about 32 to 64 MB, depending on your RAM--less RAM needs bigger swap partitions). If you decide later to deinstall Linux you can always delete both partitions and create one big one for Windows again.
Fips is a stupid command line program, but if you're too lazy to read at least a little bit, then you should stop thinking about Linux anyway...
Command Pipelines(#9)
Pipes are easy. The Unix shells provide mechanisms which you can use them to allow you to generate remarkably sophisticated `programs' out of simple components. We call that a pipeline. A pipeline is composed of a data generator, a series of filters, and a data consumer. Often that final stage is as simple as displaying the final output on stdout, and sometimes the first stage is as simple as reading from stdin. I think all shells use the "|" character to separate each stage of a pipeline. So:
data-generator | filter | ... | filter | data-consumer
Each stage of the pipeline runs in parallel, within the limits which the system permits. Hey, look closely, because that last phrase is important. Are you on a uni-processor system because if you are, then obviously only one process runs at a time, although that point is simply nitpicking. But pipes are buffers capable of holding only finite data. A process can write into a pipe until that pipe is full. When the pipe is full the process writing into it blocks until some of the data already in the pipe has been read. Similarly, a process can read from a pipe until that pipe is empty. When it's empty the reading process is blocked until some more data has been written into the pipe.
What is IP masquerading and when is it of use?(#10)
IP masquerading is a process where one computer acts as an IP gateway for a network. All computers on the network send their IP packets through the gateway, which replaces the source IP address with its own address and then forwards it to the internet. Perhaps the source IP port number is also replaced with another port number, although that is less interesting. All hosts on the internet see the packet as originating from the gateway.
Any host on the Internet which wishes to send a packet back, ie in reply, must necessarily address that packet to the gateway. Remember that the gateway is the only host seen on the internet. The gateway rewrites the destination address, replacing its own address with the IP address of the machine which is being masqueraded, and forwards that packet on to the local network for delivery.
This procedure sounds simple, and it is. It provides an effective means by which you can provide second class internet connections for a complete LAN using only one (internet) IP address.
Setting UTC or local time(#11)
When Linux boots, one of the initialisation scripts will run the /sbin/hwclock program to copy the current hardware clock time to the system clock. hwclock will assume the hardware clock is set to local time unless it is run with the --utc switch. Rather than editing the startup script, under Red Hat Linux you should edit the /etc/sysconfig/clock file and change the ``UTC'' line to either ``UTC=true'' or ``UTC=false'' as appropriate.
Setting the system clock(#12)
To set the system clock under Linux, use the date command. As an example, to set the current time and date to July 31, 11:16pm, type ``date 07312316'' (note that the time is given in 24 hour notation). If you wanted to change the year as well, you could type ``date 073123161998''. To set the seconds as well, type ``date 07312316.30'' or ``date 073123161998.30''. To see what Linux thinks the current local time is, run date with no arguments.
Setting the hardware clock(#13)
To set the hardware clock, my favourite way is to set the system clock first, and then set the hardware clock to the current system clock by typing ``/sbin/hwclock --systohc'' (or ``/sbin/hwclock --systohc --utc'' if you are keeping the hardware clock in UTC). To see what the hardware clock is currently set to, run hwclock with no arguments. If the hardware clock is in UTC and you want to see the local equivalent, type ``/sbin/hwclock --utc''
Setting your timezone(#14)
The timezone under Linux is set by a symbolic link from /etc/localtime[1] to a file in the /usr/share/zoneinfo[2] directory that corresponds with what timezone you are in. For example, since I'm in South Australia, /etc/localtime is a symlink to /usr/share/zoneinfo/Australia/South. To set this link, type:
ln -sf ../usr/share/zoneinfo/your/zone /etc/localtime
Replace your/zone with something like Australia/NSW or Australia/Perth. Have a look in the directories under /usr/share/zoneinfo to see what timezones are available.
[1] This assumes that /usr/share/zoneinfo is linked to /etc/localtime as it is under Red Hat Linux.
[2] On older systems, you'll find that /usr/lib/zoneinfo is used instead of /usr/share/zoneinfo. See also the later section ``The time in some applications is wrong''.
Zombies(#15)
What are these zombie processes that show up in ps? I kill them but they don't go away!
Zombies are dead processes. You cannot kill the dead. All processes eventually die, and when they do they become zombies. They consume almost no resources, which is to be expected because they are dead! The reason for zombies is so the zombie's parent (process) can retrieve the zombie's exit status and resource usage statistics. The parent signals the operating system that it no longer needs the zombie by using one of the wait() system calls.
When a process dies, its child processes all become children of process number 1, which is the init process. Init is ``always'' waiting for children to die, so that they don't remain as zombies.
If you have zombie processes it means those zombies have not been waited for by their parent (look at PPID displayed by ps -l). You have three choices: Fix the parent process (make it wait); kill the parent; or live with it. Remember that living with it is not so hard because zombies take up little more than one extra line in the output of ps.
How do i give users an ftp only account (no telnet, etc).(#16)
give them shell which doesn't work, but is listed in /etc/shells
for example /bin/false...
How to do backup with tar?(#17)
You can mantain a list of files that you with to backup into a file and tar
it when you wish.
tar czvf tarfile.tar.gz -T list_file
where list_file is a simple list of what you want to include into the tar
i.e:
/etc/smb.conf
/root/myfile
/etc/ppp (all files into the /etc/ppp directory)
/opt/gnome/html/gnome-dev-info.html
How to keep a computer from answering to ping?(#18)
a simple "echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all" will do the
trick... to turn it back on, simply
"echo 0 > /proc/sys/net/ipv4/icmp_echo_ignore_all"
Customizing your directory colors.(#19)
I know a lot of you know the command ls --color. Which displays your directory with colors. But, a lot of people may not know that those colors are customizable. All you need to do is add the following line to your /etc/bashrc file.
eval `dircolors /etc/DIR_COLORS`
And then all of the color configuration can be found in the file /etc/DIR_COLORS
Frozen Xwindow(#20)
If your Xwindow freezes sometimes, here are two ways that you may try to kill your server. The first is the simple simple way of killing your X server the key combination: Ctrl+Alt+Backspace
The second way is a little more complicated, but it works most of the time. Hit Ctrl+Alt+F2 to startup a virtual console, then log in with your user name and password and run:
# ps -ax | grep startx
This will give you the PID of your Xserver. Then just kill it with:
# kill -9 PID_Number
To go back to your first console, just hit Alt-F1
Converting all files in a directory to lowercase.(#21)
#!/bin/sh
# lowerit
# convert all file names in the current directory to lower case
# only operates on plain files--does not change the name of directories
# will ask for verification before overwriting an existing file
for x in `ls`
do
if [ ! -f $x ]; then
continue
fi
lc=`echo $x | tr '[A-Z]' '[a-z]'`
if [ $lc != $x ]; then
mv -i $x $lc
fi
done
Wow. That's a long script. I wouldn't write a script to do that; instead, I would use this command:
for i in * ; do [ -f $i ] && mv -i $i `echo $i | tr '[A-Z]' '[a-z]'`;
done;
on the command line.
Script to view those compressed HOWTOs.(#22)
From a newbie to another, here is a short script that eases looking for and viewing howto documents. My howto's are in /usr/doc/faq/howto/ and are gzipped. The file names are XXX-HOWTO.gz, XXX being the subject. I created the following script called "howto" in the /usr/local/sbin directory:
#!/bin/sh
if [ "$1" = "" ]; then
ls /usr/doc/faq/howto | less
else
gunzip -c /usr/doc/faq/howto/$1-HOWTO.gz | less
fi
When called without argument, it displays a directory of the available howto's. Then when entered with the first part of the file name (before the hyphen) as an argument, it unzips (keeping the original intact) then displays the document.
For instance, to view the Serial-HOWTO.gz document, enter:
$ howto Serial
Util to clean up your logfiles.(#23)
If you're like me, you have a list with 430 subscribers, plus 100+ messages per day coming in over UUCP. Well, what's a hacker to do with these huge logs? Install chklogs, that's what. Chklogs is written by Emilio Grimaldo, grimaldo@panama.iaehv.nl, and the current version 1.8 available from ftp.iaehv.nl:/pub/users/grimaldo/chklogs-1.8.tar.gz. It's pretty self explanatory to install(you will, of course, check out the info in the doc subdirectory). Once you've got it installed, add a crontab entry like this:
# Run chklogs at 9:00PM daily.
00 21 * * * /usr/local/sbin/chklogs -m
Handy Script to Clean Up Corefiles.(#24)
Create a file called rmcores(the author calls it handle-cores) with the following in it:
#!/bin/sh
USAGE="$0 "
if [ $# != 2 ] ; then
echo $USAGE
exit
fi
echo Deleting...
find $1 -name core -atime 7 -print -type f -exec rm {} \;
echo e-mailing
for name in `find $1 -name core -exec ls -l {} \; | cut -c16-24`
do
echo $name
cat $2 | mail $name
done
And have a cron job run it every so often.
Moving directories between filesystems.Quick way to move an entire tree of files from one disk to another (#25)
(cd /source/directory && tar cf - . ) | (cd /dest/directory && tar xvfp -)
[ Change from cd /source/directory; tar....etc. to prevent possibility of trashing directory in case of disaster.]
Finding out which directories are the largest.Ever wondered which directories are the biggest on your computer? Here's how to find out.(#26)
du -S | sort -n
How do I stop my system from fscking on each reboot?(#27)
When you rebuild the kernel, the filesystem is marked as 'dirty' and so your disk will be checked with each boot. The fix is to run:
rdev -R /zImage 1
This fixes the kernel so that it is no longer convinced that the filesystem is dirty.
Note: If using lilo, then add read-only to your linux setup in your lilo config file (Usually /etc/lilo.conf)
How to avoid fscks caused by "device busy" at reboot time.(#28)
If you often get device busy errors on shutdown that leave the filesystem in need of an fsck upon reboot, here is a simple fix:
To /etc/rc.d/init.d/halt or /etc/rc.d/rc.0, add the line
mount -o remount,ro /mount.dir
for all your mounted filesystems except /, before the call to umount -a. This means if, for some reason, shutdown fails to kill all processes and umount the disks they will still be clean on reboot. Saves a lot of time at reboot for me.
How to find the biggest files on your hard-drive.(#29)
ls -l | sort +4n
Or, for those of you really scrunched for space this takes awhile but works great:
cd /
ls -lR | sort +4n
A script for cleaning up after programs that create autosave and backup files.(#30)
Here is a simple two-liner which recursively descends a directory hierarchy removing emacs auto-save (#) and backup (~) files, .o files, and TeX .log files. It also compresses .tex files and README files. I call it 'squeeze' on my system.
#!/bin/sh
#SQUEEZE removes unnecessary files and compresses .tex and README files
#By Barry tolnas, tolnas@sun1.engr.utk.edu
#
echo squeezing $PWD
find $PWD \( -name \*~ -or -name \*.o -or -name \*.log -or -name \*\#\) -exec
rm -f {} \;
find $PWD \( -name \*.tex -or -name \*README\* -or -name \*readme\* \) -exec gzip -9 {} \;
How to find out what process is eating the most memory.(#31)
ps -aux | sort +4n
-OR-
ps -aux | sort +5n
How do I find which library in /usr/lib holds a certain function?(#32)
What if you're compiling and you've missed a library that needed linking in? All gcc reports are function names... Here's a simple command that'll find what you're looking for:
for i in *; do echo $i:;nm $i|grep tgetnum 2>/dev/null;done
Where tgetnum is the name of the function you're looking for.
I compiled a small test program in C, but when I run it, I get no output!(#32)
You probably compiled the program into a binary named test, didn't you? Linux has a program called test, which tests if a certain condition is true, it never produces any output on the screen. Instead of just typing test, try: ./test
Sunday, February 21, 2010
mIRCcommands
If you would like to keep a particularly interesting chat that has scrolled by but is still in your buffer there is a way to save it! Type "ALT -" (alt minus) to enter the system menu under the top left little icon thingy above every channel or private conversation. In this menu select the Buffer/Save As/ entry and save your buffer to a file. Succes!
The LOCK feature in mIRC allows you to minimize mIRC and lock it with a password for strange eyes. If you control-minimize mIRC (keep the Ctrl-key pressed down while minimizing mIRC), it will be locked with your password. If no password was set previously mIRC will ask you for one. Later when you want to maximize mIRC you need your password to activate it. An extention of this feature in the /File/Options/General/Lock/ menu can be used to lock mIRC or certain channels for your children!
Shift+Mouse on Switchbar Did you know that you can 'fast-close' a window in mIRC by clicking its button on the Switchbar while holding the SHIFT key pressed down??
/uwho Ever wondered who you're actually speaking with? The /whois {nick} command shows you a lot of cryptic info in the Status window but the /uwho {nick} command will open a clear and informative User Central. Give it a try! You can also store address info of your friends in the User Central for future reference.
ALT + Minus Press the key combination ALT and 'minus' simultaneous to access the windows' System Menu's (found under that little horizontal bar in every top left corner of ANY window in mIRC and windows). Here you can set the fonts you like, the logging options, save the buffer and set various other things for private and channel conversations.
/clear Use the /clear command to flush away all old text you dont want to read again. /clearall clears all text in all windows!
Remember that old doskey feature under DOS? mIRC has it too! Use the arrow up/down keys, eventually combined with SHIFT, to recall old commands and text lines.
/channel The /channel command will open the Channel Central that displays all modes and bans set on your current channel.
/pdcc Use the undocumented /pdcc [on|off] command to speed up your DCC sessions! It will pump a certain amount of your data packages away to the reciever, ahead of the confirmation of their arrival. Try it, it works .
Quick reference to mIRC's commands:
If you need more info on any command listed here, type /help {command} in mIRC. The list here is far from complete!
/ Recalls the previous line entered in the current window.
/! Recalls the last command typed in any window.
/action {action text} Sends the specifed action to the active channel or query window.
/ame {action text} Sends the specifed action to all channels which you are currently on.
/amsg {text} Sends the specifed message to all channels which you are currently on.
/auser {level} {nick|address} Adds a user with the specified access level to the remote users list.
/auto [on|off|nickname|address] Toggles auto-opping of a nick or address or sets it on or off totally.
/away {away message} Sets you away leave a message explaining that you are not currently paying attention to IRC.
/away A plain away sets you being back.
/ban [#channel] {nickname} [type] Bans the specified nick from the curent or given channel.
/beep {number} {delay} Locally beeps 'number' times with 'delay' inbetween the beeps. /channel Pops up the channel central window (only works in a channel).
/clear Clears the entire scrollback buffer of the current window.
/clearall Clears all text in all open windows.
/ctcp {nickname} {ping|finger|version|time|userinfo|clientinfo} Does the given ctcp request on nickname.
/ctcps [on|off] Sets the Tools/Remote/ section (not) to listen to CTCP commands. Or checks its status.
/closemsg {nickname} Closes the query window you have open to the specified nick.
/creq [ask | auto | ignore] Sets your DCC 'On Chat request' settings in DCC/Options.
/dcc send {nickname} {file1} {file2} {file3} ... {fileN} Sends the specified files to nick.
/dcc chat {nickname} Opens a dcc window and sends a dcc chat request to nickname.
/dde [-r] {service} {topic} {item} [data] Allows DDE control between mIRC and other applications.
/ddeserver [[on [service name] | off] To turn on the DDE server mode, eventually with a givem service name.
/describe {#channel} {action text} Sends the specifed action to the specified channel window.
/disable {#groupname} De-activates a group of commands or events.
/disconnect Forces a hard and immediate disconnect from your IRC server. Use it with care.
/dlevel {level} Changes the default user level in the remote section.
/dns {nickname | IP address | IP name} Uses your providers DNS to resolve an IP address.
/echo [nickname|#channel|status] {text} Displays the given text only to YOU on the given place in color N.
/enable {#groupname} Activates a group of commands or events.
/events [on|off] Sets the Tools/Remote/ section (not) to listen to ON .. Events. Or checks its status.
/exit Forces mIRC to closedown and exit.
/finger {nick|address} Does a finger on a users address.
/flood [{numberoflines} {seconds} {pausetime}] Sets a crude flood control method.
/flush [levels] Clears all nicknames from the Remote/users list that are currently not on your channels.
/font Activates the font selection dialog.
/fsend [on|off] Shows fsends status and allows you to turn dcc fast send on or off.
/fserve {nickname} {maxgets} {homedirectory} [welcome text file] Opens a fileserver.
/groups [-e|d] Shows all (enabled or disabled) groups defined in the remote sections.
/guser {level} {nick} [type] Adds the user to the user list with the specified level and address type.
/help {keyword} Brings up the Basic IRC Commands section in the mIRC help file.
/ignore [on|off|nickname|address] Toggles ignoring of a nick or address or sets it on or off totally.
/invite {nickname} {#channel} Invites another user to a channel.
/join {#channel} Makes you join the specified channel.
/kick {#channel} {nickname} Kicks nickname off a given channel.
/list [#string] [-min #] [-max #] Lists all currently available channels, evt. filtering for parameters.
/load {-apuce} {filename.ini} Loads Aliases, Popups or Remote items into mIRC.
/log [on|off] Shows the logging status or sets it on or off for the current window.
/me {action text} Sends the specifed action to the active channel or query window. Also see /describe and /ctcp action.
/mode {#channel|nickname} [[+|-]modechars [parameters]] Sets channel or user modes.
/msg {nickname} {message} Send a private message to this user without opening a query window.
/names {#channel} Shows the nicks of all people on the given channel.
/nick {new nickname} Changes your nickname to whatever you like.
/notice {nick} {message} Send the specified notice message to the nick.
/notify [on|off|nickname] Toggles notifying you of a nick on IRC or sets it on or off totally.
/onotice [#channel] {message} Send the specified notice message to all channel ops.
/omsg [#channel] {message} Send the specified message to all ops on a channel.
/part [#channel] [message] Makes you leave the specified channel.
/partall Makes you leave all channels you are on.
/ping {server address} Pings the given server. NOT a nickname.
/play [-cpqmrlt] [channel/nick] {filename} [delay/linenumber] Allows you to play text files.
/pop {delay} [#channel] {nickname} Performs a randomly delayed +o on a not already opped nick.
/protect [on|off|nickname|address] Toggles protection of a nick or address or sets it on or off totally.
/query {nickname} {message} Open a query window to this user and send them the private message.
/quit [reason] Disconnect you from IRC with the optional byebye message.
/raw [on|off] Sets the Tools/Remote/ section (not) to listen to Raw commands. Or checks its status.
/raw {raw command} Sends any raw command you supply directly to the server. Use with care!
/remote [on|off] Sets the Tools/Remote/ section (not) to listen to CTCP or Raw remote commands and Events. Or checks its status.
/rlevel {access level} Removes all users from the remote users list with the specified access level.
/run {c:\path\program.exe} [parameters] Runs the specified program, evt. with parameters. Also try /run h**p://w*w.mirc.com etc.
/ruser {nick[!]|address} [type] Removes the user from the remote users list.
/save [-apuce] {filename.ini} Saves remote sections into a specified INI file.
/say {text} Says whatever you want to the active window.
/server [server address [port] [password]] Reconnects to the previous server or a newly specified one.
/sound [nickname|#channel] {filename.wav} {action text} Sends an action and a fitting sound request.
/speak {text} Uses the external text to speech program Monologue to speak up the text. Better use /gtalk with mIRC's Agent support.
/sreq [ask | auto | ignore] Sets your DCC 'On Send request' settings in DCC/Options.
/time Tells you the time on the server you use.
/timer[N] {repetitions} {interval in seconds} {command} [| {more commands}] Activates a timer.
/timestamp [on | off] Sets timestamping on or off for all your conversations.
/topic {#channel} {newtopic} Changes the topic for the specified channel.
/ulist {level} Lists all users in the remote list with the specified access levels.
/url [on|off|show|hide] [address] Opens the URL window that allows you to surf the www parallel to IRC.
/uwho [nick] Pops up the user central with information about the specified user.
/splay {c:\path\sound.file} Locally plays the specified sound file.
/who {#channel} Shows the nicks of all people on the given channel.
/who {*part.of.address*} Shows all people on IRC with a matching address.
/whois {nickname} Shows information about someone in the status window. Also try /uwho.
/whowas {nickname} Shows information about someone who -just- left IRC.
/write [-cidl] {filename} [text] To write the specified text to a .txt file.
mIRC supports lots, lots and a lot more commands... Especially the commands that are used in scripts, with lots of options, are not included in this list. Therefore this list should be seen as a suggestion to get you going.
The LOCK feature in mIRC allows you to minimize mIRC and lock it with a password for strange eyes. If you control-minimize mIRC (keep the Ctrl-key pressed down while minimizing mIRC), it will be locked with your password. If no password was set previously mIRC will ask you for one. Later when you want to maximize mIRC you need your password to activate it. An extention of this feature in the /File/Options/General/Lock/ menu can be used to lock mIRC or certain channels for your children!
Shift+Mouse on Switchbar Did you know that you can 'fast-close' a window in mIRC by clicking its button on the Switchbar while holding the SHIFT key pressed down??
/uwho Ever wondered who you're actually speaking with? The /whois {nick} command shows you a lot of cryptic info in the Status window but the /uwho {nick} command will open a clear and informative User Central. Give it a try! You can also store address info of your friends in the User Central for future reference.
ALT + Minus Press the key combination ALT and 'minus' simultaneous to access the windows' System Menu's (found under that little horizontal bar in every top left corner of ANY window in mIRC and windows). Here you can set the fonts you like, the logging options, save the buffer and set various other things for private and channel conversations.
/clear Use the /clear command to flush away all old text you dont want to read again. /clearall clears all text in all windows!
Remember that old doskey feature under DOS? mIRC has it too! Use the arrow up/down keys, eventually combined with SHIFT, to recall old commands and text lines.
/channel The /channel command will open the Channel Central that displays all modes and bans set on your current channel.
/pdcc Use the undocumented /pdcc [on|off] command to speed up your DCC sessions! It will pump a certain amount of your data packages away to the reciever, ahead of the confirmation of their arrival. Try it, it works .
Quick reference to mIRC's commands:
If you need more info on any command listed here, type /help {command} in mIRC. The list here is far from complete!
/ Recalls the previous line entered in the current window.
/! Recalls the last command typed in any window.
/action {action text} Sends the specifed action to the active channel or query window.
/ame {action text} Sends the specifed action to all channels which you are currently on.
/amsg {text} Sends the specifed message to all channels which you are currently on.
/auser {level} {nick|address} Adds a user with the specified access level to the remote users list.
/auto [on|off|nickname|address] Toggles auto-opping of a nick or address or sets it on or off totally.
/away {away message} Sets you away leave a message explaining that you are not currently paying attention to IRC.
/away A plain away sets you being back.
/ban [#channel] {nickname} [type] Bans the specified nick from the curent or given channel.
/beep {number} {delay} Locally beeps 'number' times with 'delay' inbetween the beeps. /channel Pops up the channel central window (only works in a channel).
/clear Clears the entire scrollback buffer of the current window.
/clearall Clears all text in all open windows.
/ctcp {nickname} {ping|finger|version|time|userinfo|clientinfo} Does the given ctcp request on nickname.
/ctcps [on|off] Sets the Tools/Remote/ section (not) to listen to CTCP commands. Or checks its status.
/closemsg {nickname} Closes the query window you have open to the specified nick.
/creq [ask | auto | ignore] Sets your DCC 'On Chat request' settings in DCC/Options.
/dcc send {nickname} {file1} {file2} {file3} ... {fileN} Sends the specified files to nick.
/dcc chat {nickname} Opens a dcc window and sends a dcc chat request to nickname.
/dde [-r] {service} {topic} {item} [data] Allows DDE control between mIRC and other applications.
/ddeserver [[on [service name] | off] To turn on the DDE server mode, eventually with a givem service name.
/describe {#channel} {action text} Sends the specifed action to the specified channel window.
/disable {#groupname} De-activates a group of commands or events.
/disconnect Forces a hard and immediate disconnect from your IRC server. Use it with care.
/dlevel {level} Changes the default user level in the remote section.
/dns {nickname | IP address | IP name} Uses your providers DNS to resolve an IP address.
/echo [nickname|#channel|status] {text} Displays the given text only to YOU on the given place in color N.
/enable {#groupname} Activates a group of commands or events.
/events [on|off] Sets the Tools/Remote/ section (not) to listen to ON .. Events. Or checks its status.
/exit Forces mIRC to closedown and exit.
/finger {nick|address} Does a finger on a users address.
/flood [{numberoflines} {seconds} {pausetime}] Sets a crude flood control method.
/flush [levels] Clears all nicknames from the Remote/users list that are currently not on your channels.
/font Activates the font selection dialog.
/fsend [on|off] Shows fsends status and allows you to turn dcc fast send on or off.
/fserve {nickname} {maxgets} {homedirectory} [welcome text file] Opens a fileserver.
/groups [-e|d] Shows all (enabled or disabled) groups defined in the remote sections.
/guser {level} {nick} [type] Adds the user to the user list with the specified level and address type.
/help {keyword} Brings up the Basic IRC Commands section in the mIRC help file.
/ignore [on|off|nickname|address] Toggles ignoring of a nick or address or sets it on or off totally.
/invite {nickname} {#channel} Invites another user to a channel.
/join {#channel} Makes you join the specified channel.
/kick {#channel} {nickname} Kicks nickname off a given channel.
/list [#string] [-min #] [-max #] Lists all currently available channels, evt. filtering for parameters.
/load {-apuce} {filename.ini} Loads Aliases, Popups or Remote items into mIRC.
/log [on|off] Shows the logging status or sets it on or off for the current window.
/me {action text} Sends the specifed action to the active channel or query window. Also see /describe and /ctcp action.
/mode {#channel|nickname} [[+|-]modechars [parameters]] Sets channel or user modes.
/msg {nickname} {message} Send a private message to this user without opening a query window.
/names {#channel} Shows the nicks of all people on the given channel.
/nick {new nickname} Changes your nickname to whatever you like.
/notice {nick} {message} Send the specified notice message to the nick.
/notify [on|off|nickname] Toggles notifying you of a nick on IRC or sets it on or off totally.
/onotice [#channel] {message} Send the specified notice message to all channel ops.
/omsg [#channel] {message} Send the specified message to all ops on a channel.
/part [#channel] [message] Makes you leave the specified channel.
/partall Makes you leave all channels you are on.
/ping {server address} Pings the given server. NOT a nickname.
/play [-cpqmrlt] [channel/nick] {filename} [delay/linenumber] Allows you to play text files.
/pop {delay} [#channel] {nickname} Performs a randomly delayed +o on a not already opped nick.
/protect [on|off|nickname|address] Toggles protection of a nick or address or sets it on or off totally.
/query {nickname} {message} Open a query window to this user and send them the private message.
/quit [reason] Disconnect you from IRC with the optional byebye message.
/raw [on|off] Sets the Tools/Remote/ section (not) to listen to Raw commands. Or checks its status.
/raw {raw command} Sends any raw command you supply directly to the server. Use with care!
/remote [on|off] Sets the Tools/Remote/ section (not) to listen to CTCP or Raw remote commands and Events. Or checks its status.
/rlevel {access level} Removes all users from the remote users list with the specified access level.
/run {c:\path\program.exe} [parameters] Runs the specified program, evt. with parameters. Also try /run h**p://w*w.mirc.com etc.
/ruser {nick[!]|address} [type] Removes the user from the remote users list.
/save [-apuce] {filename.ini} Saves remote sections into a specified INI file.
/say {text} Says whatever you want to the active window.
/server [server address [port] [password]] Reconnects to the previous server or a newly specified one.
/sound [nickname|#channel] {filename.wav} {action text} Sends an action and a fitting sound request.
/speak {text} Uses the external text to speech program Monologue to speak up the text. Better use /gtalk with mIRC's Agent support.
/sreq [ask | auto | ignore] Sets your DCC 'On Send request' settings in DCC/Options.
/time Tells you the time on the server you use.
/timer[N] {repetitions} {interval in seconds} {command} [| {more commands}] Activates a timer.
/timestamp [on | off] Sets timestamping on or off for all your conversations.
/topic {#channel} {newtopic} Changes the topic for the specified channel.
/ulist {level} Lists all users in the remote list with the specified access levels.
/url [on|off|show|hide] [address] Opens the URL window that allows you to surf the www parallel to IRC.
/uwho [nick] Pops up the user central with information about the specified user.
/splay {c:\path\sound.file} Locally plays the specified sound file.
/who {#channel} Shows the nicks of all people on the given channel.
/who {*part.of.address*} Shows all people on IRC with a matching address.
/whois {nickname} Shows information about someone in the status window. Also try /uwho.
/whowas {nickname} Shows information about someone who -just- left IRC.
/write [-cidl] {filename} [text] To write the specified text to a .txt file.
mIRC supports lots, lots and a lot more commands... Especially the commands that are used in scripts, with lots of options, are not included in this list. Therefore this list should be seen as a suggestion to get you going.
Friday, February 19, 2010
Pc File Extention Listing
This chart is a list of the most commonly found extensions, what type of file they are and what program if any they are associated with.
.$$$ Temporary file
.$$A OS/2 program file
.$$F OS/2 database file
.$$S OS/2 spreadsheet file
.$D$ OS/2 planner file
.$DB DBASE IV temporary file
.$ED Microsoft C temporary editor file.
.$VM Microsoft Windows temporary file for virtual managers.
._DD Norton disk doctor recovery file.
._DM Nuts n Bolts disk minder recovery file.
.--- File used to backup sys, ini, dat, and other important files from Windows 3.1 and above.
.075 Ventura Publisher 75x75 dpi screen characters
.085 Ventura Publisher 85x85 dpi screen characters
.091 Ventura Publisher 91x91 dpi screen characters
.096 Ventura Publisher 96x96 dpi screen characters
.0B Pagemaker printer font LineDraw enhanced characters.
.1ST File used by some software manufacturers to represent a file that should be read first before starting the program.
.2GR File used in Windows 3.x to display the graphics on older 286 and 386 computers.
.386 Virtual machine support files for the 386 enhanced mode.
.3GR File used in Windows 3.x to display the graphics on later 386, 486 and Pentium computers.
.4SW 4DOS Swap file
A
A ADA program file or UNIX library
.A3W MacroMedia Authorware 3.5 file
.ABK Autobackup file used with Corel Draw 6 and above.
.ABR Brush file for Adobe Photoshop
.ACT Adobe Photoshop Color table file.
.AD After Dark file.
.ADF Adapter description files.
.ADM After Dark screen saver module.
.ADR After Dark randomizer
.AI Adobe Illustrator file.
.AIF Auto Interchange File Format (AIFF) Audio file.
.ANI Windows 95 / Windows 98 / Windows NT animated mouse cursor file.
.ANS ANSI text file.
.ARJ Compressed file can be used with Winzip / Pkzip.
.ASC ASCII Text file
.ASF Sort for Advanced Streaming Format, file developed by Microsoft. The .ASF file is generally a movie player and can be open with software such as Windows Media Player.
.ASP Microsoft FrontPage Active Server Pages. To open these files use your internet browser.
.AVI Windows Movie file.
B
.BAK Backup file used for important windows files usually used with the System.ini and the Win.ini.
.BAS QBasic program and or Visual Basic Module.
.BAT Batch file that can perform tasks for you in dos, like a macro.
.BFC Microsoft Windows 95 / Windows 98 Briefcase file.
.BG Backgammon game file.
.BIN Translation tables for code pages other than the standard 437.
.BK2 Word Perfect for Windows Backup file
.BK3 Word Perfect for Windows Backup file
.BK4 Word Perfect for Windows Backup file
.BK5 Word Perfect for Windows Backup file
.BK6 Word Perfect for Windows Backup file
.BK7 Word Perfect for Windows Backup file
.BK8 Word Perfect for Windows Backup file
.BK9 Word Perfect for Windows Backup file
.BMP Graphical Bit Mapped File used in Windows Paintbrush.
.BNK Sim City Backup
.BPS Microsoft Works Word Processor File.
.BPT Corel Draw Bitmap master file
.BV1 Word Perfect for Windows Backup file
.BV2 Word Perfect for Windows Backup file
.BV3 Word Perfect for Windows Backup file
.BV4 Word Perfect for Windows Backup file
.BV5 Word Perfect for Windows Backup file
.BV6 Word Perfect for Windows Backup file
.BV7 Word Perfect for Windows Backup file
.BV8 Word Perfect for Windows Backup file
.BV9 Word Perfect for Windows Backup file
.BWP BatteryWatch pro file.
C
.C C file used with the C programming language.
.CAB Cabinet file used in Windows 95 and Windows 98 that contains all the windows files and drivers. Information about how to extract a .CAB file can be found on document CH000363.
.CAL Windows Calendar, Supercalculator4 file or Supercal spreadsheet.
.CBL COBOL Program File
.CBT Computer Based Training files.
.CDA CD Audio Player Track.
.CDR Corel Draw Vector file.
.CFB Comptons Multimedia file
.CFG Configuration file
.CFL Corel flowchart file
.CFM Corel FontMaster file / Cold Fusion Template file / Visual dBASE windows customer form
.CHK Scandisk file which is used to back up information that scandisk has found to be bad, found in C root. Because the information within these files are corrupted or reported as bad by Scandisk it is perfectly fine to delete these files, providing you are currently not missing any information. Additional information about scandisk can be found on our scandisk page.
.CL Generic LISP source code.
.CL3 Easy CD Creator layout file.
.CL4 Easy CD Creator layout file.
.CLA Java Class file.
.CLG Disk catalog database
.CLK Corel R.A.V.E. animation file.
.CLL Crick software clicker file
.CLO Cloe image
.CLP Windows Clipboard / Quattro Pro clip art / Clipper 5 compiler script
.CLR WinEdit Colorization word list / 1st reader binary color screen image / PhotStyler color definition
.CLS Visual Basic Class module / C++ Class definition
.CMD Windows Script File also OS/2 command file.
.CMV Corel Movie file.
.CNT Help file (.hlp) Contents (and other file contents)
.CPL Windows 95 / Windows 98 / Windows NT control panel icons.
.CNE Configuration file that builds .COM files.
.CNF Configuration file.
.COB COBOL source code file.
.COD FORTRAN Compiler program code
.COM File that can be executed.
.CPE Fax cover page file
.CPI Code Page Information or Microsoft Windows applet control panel file
.CPP C++ source code file.
.CRD Windows Card file.
.CSV Comma-Separated Variable file. Used primary with databases and spreadsheets / Image file used with CopuShow
.CUR Windows Mouse Cursor.
.CVS Canvas drawing file
.CXX C++ program file or Zortech C++ file
D
.DAT Data file, generally associated or extra data for a program to use.
.DB Paradox database file / Progress database file
.DB2 dBase II file
.DBC Microsoft Visiual Foxpro database container
.DBF dBase II,III,III+,IV / LotusWorks database.
.DBK dBase databse backup / Orcad schematic capture backup file
.DBM Cold Fusion template
.DBO dBase IV compiled program file
.DBQ Paradox memo
.DBT dBase database text file
.DBV Flexfile memo field file
.DBW DataBoss database file
.DBX Database file / DataBeam Image / MS Visual Foxpro Table
.DEV Device Driver
.DIF Document Interchange Format; VisiCalc
.DLL Dynamic Link Library; Allow executable code modules to be loaded on demand, linked at run time, and unloaded when not needed. Windows uses these files to support foreign languages and international/nonstandard keyboards.
.DMO Demo file
.DMP Dump file
.DMD Visual dBASE data module
.DMF Delusion/XTracker Digital Music File
.DMO Demo file
.DMP Dump file
.DMS Compressed archive file
.DOC Microsoft Word Windows/DOS / LotusWorks word processor Windows/DOS /PF S:First Choice Windows/DOS DOT MS Word Windows/DOS.
.DOS Text file and DOS Specification Info
.DOT Microsoft Word Template (Macro).
.DRV Device driver files that attach the hardware to Windows. The different drivers are system, keyboard, pointing devices, sound, printer/ plotter, network, communications adapter.
.DRW Micrografx draw/graph files.
.DT_ Macintosh Data File Fork
.DTA Data file
.DTD SGML Document definition file
.DTF Q&A database
.DTM DigiRekker module
.DTP SecurDesk! Desktop / Timeworks Publisher Text Document / Pressworks Template file
.DUN Dialup Networking exported file.
.DX Document Imaging file / Digital data exchange file
.DXB Drawing interchange binary file
.DXF Autocad drawing interchange format file
.DXN Fujitsu dexNet fax document
.DXR Macromedia director projected movie file
.DYN Lotus 1-2-3 file
.DWG AutoCad Drawing Database
E
.EEB Button bar for Equation Editor in Word Perfect for Windows
.EFT CHIWRITER high resolution screen characters
.EGA EGA screen characters for Ventura Publisher
.ELG Event List text file used with Prosa
.EMS Enhanced Menu System configuration file for PC Tools
.EMU IRMA Workstation for Windows emulation
.ENC ADW Knowledge Ware Encyclopedia
.END Corel Draw Arrow Definition file
.ENG Sprint dictionary file engine
.ENV Word Perfect for Windows environment file.
.EPG Exported PaGe file used with DynaVox
.EPS Encapsulated Postscript, with embedded TIFF preview images.
.EQN Word Perfect for Windows Equation file
.ERD Entity Relation Diagram graphic file
.ERM Entity Relation Diagram model file
.ERR Error log file
.ESH Extended Shell Batch file
.EVT Event file scheduler file for PC Tools
.EX3 Device driver for Harvard graphics 3.0
.EXC QEMM exclude file from optimization file or Rexx program file
.EXE Executable file.
.EXT Extension file for Norton Commander
F
.FDF Adobe Acrobat Forms Document.
.FF AGFA CompuGraphics outline font description.
.FFA Microsoft Fast Find file.
.FFF GUS PnP bank / defFax fax document
.FFL Microsoft Fast Find file / PrintMaster Gold form file
.FFO Microsoft Fast Find file
.FFT DCA/FFT final form text
.FFX Microsoft Fast Find file
.FON Font files to support display and output devices.
.FR3 dBase IV renamed dBase III+ form
.FRF FontMonger Font
.FRG dBase IV uncompiled report
.FRK Compressed zip file used with Apple Macinotsh computers.
.FRM Form file used with various programs / Microsoft Visual Basic Form / FrameMaker document / FrameBuilder file / Oracle executable form / Word Perfect Merge form / DataCAD symbol report file
.FRO dBase IV compiled report / FormFlow file
.FRP PerForm Pro Plus Form
.FRS WordPerfect graphics driver
.FRT FoxPro report file
.FRX Microsoft Visual basic binary form file / FoxPro report file
.FRZ FormFlow file
G
.GIF CompuServe Graphics Interchange Format.
.GR2 286 grabbers that specify which font to use with DOS and Windows.
.GR3 386 grabbers that specify which font to use with DOS and Windows.
.GRA Microsoft Flight simulator graphics file
.GRB Microsoft MS-DOS shell monitor
.GRF Micrografx draw/graph files.
.GRP Microsoft Program Group.
.GZ Compressed Archive file for GZip
H
.HBK Mathcad handbook file
.HDL Procomm Plus alternate download file listing
.HDR Procomm Plus message header
.HDX Help index
.HEX Hex dump
.HFI GEM HP font info
.HGL HP graphics language graphic
.HH C++ Header
.HHH Precompiled Header for Power C
.HHP Help data for Procomm Plus
.HLP Files that contain the Help feature used in windows, cannot be read from DOS.
.HQX Apple Macintosh Binhex text conversion file.
.HSQ Data files associated with the Qaz Trojan.
.HSS Photoshop Hue/Saturation information.
.HST History file / Procomm Plus History File / Host file.
.HTA Hypertext Application (run applications from HTML document).
.HTM Web page files containing HTML or other information found on the Internet.
I
.ICA Citrix file / IOCA graphics file
.ICB Targa Bitmap
.ICC Kodak printer image
.ICE Archive file
.ICL Icon library file
.ICM Image Color Matching profile file
.ICN Microsoft Windows Icon Manager.
.ICO Microsoft Windows Icondraw / Icon.
.ID Disk identification file.
.IDB Microsoft developer intermediate file, used with Microsoft Visual Studio
.IDD MIDI instruments definition
.IDE Integrated Development Environment configuration file
.IDF MIDI instruments drivers file
.IDQ Internet data query file
.IDX Index file
.IFF IFF/LBM (Amiga) used by Computer Eyes frame grabber.
.IMG GEM/IMG (Digital Research) or Ventura Publisher bitmap graphic
.INF Information file that contains customization options.
.INI Files that initialize Windows and Windows apps.
.IPF Installer Script File / OS/2 online documentation for Microsoft source files.
.ISO Compressed file used for an exact duplicate of a CD. .ISO files can be extracted or opened such programs as Win Image that can be found on our shareware download section.
.IWA IBM Writing Assistant Text file.
J
.JAS Graphic
.JPG Graphic commonly used on the Internet and capable of being opened by most modern image editors.
.JS JavaScript file.
.JSB Henter-Joyce Jaws script binary file
.JSD eFAX jet suite document
.JSE JScript encoded script file
.JSH Henter-Joyce Jaws script header file
.JSL PaintShop pro file
.JSM Henter-Joyce Jaws script message file
.JSP Java server page
.JSS Henter-Joyce Jaws script source file
.JT JT fax file
.JTF JPEG tagged Interchange format file
.JTK Sun Java toolkit file
.JTP JetForm file
.JW Justwrite text file
.JWL Justwrite text file library
.JZZ Jazz spreadsheet
K
.KAR Karaoke File used with some audio players.
L
.LGC Program Use Log File (for Windows Program Use Optimization).
.LGO Contains the code for displaying the screen logo.
.LOG Contains the process of certain steps, such as when running scandisk it will usually keep a scandisk.log of what occurred.
.LNK HTML link file used with Microsoft Internet Explorer.
.LWP Lotus Wordpro 96/97 file.
M
.MAC Macintosh macpaint files.
.MBX Microsoft Outlook Express mailbox file.
.MD Compressed Archive file
.MDA Microsoft Access Add-in / Microsoft Access 2 Workgroup.
.MDB Microsoft Access Database / Microsoft Access Application.
.MDE Microsoft Access Database File
.MDF Menu definition file
.MDL Digitrakker Music Module / Rational Rose / Quake model file
.MDM Telix Modem Definition
.MDN Microsoft Access Blank Database Template
.MDP Microsoft Developer Studio Project
.MDT Microsoft Access Add-in Data
.MDW Microsoft Access Workgroup Information
.MDX dBase IV Multiple Index
.MDZ Microsoft Access Wizard Template
.MEB WordPerfect Macro Editor bottom overflow file
.MED WordPerfect Macro Editor delete save / OctaMed tracker module
.MEM WordPerfect Macro Editor macro / Memory File of variables
.MID Midi orchestra files that are used to play with midi sounds built within the sound card.
.MIX Power C object file / Multiplayer Picture file (Microsoft Photodraw 2000 & Microsoft Picture It!) / Command & Conquer Movie/Sound file
.MOD Winoldap files that support (with grabbers) data exchange between DOS apps and Windows apps.
.MOV File used with Quick Time to display a move.
.MP1 MPEG audio stream, layer I
.MP2 MPEG audio stream, layer II
.MP3 MPEG audio stream, layer III; High compressed audio files generally used to record audio tracks and store them in a decent sized file available for playback. See our MP3 page for additional information.
.MPG MPEG movie file.
.MSN Microsoft Network document / Decent mission file
.MTF Windows metafile.
.MTH Derive Math file
.MTM Sound file / MultiTracker music module
.MTV Picture file
.MTW Minitab data file
.MU Quattro menu
.MUL Ultima Online game
.MUP Music publisher file
.MUS Audio file
.MVB Database file / Microsoft multimedia viewer file
.MVE Interplay video file
.MVF Movie stop frame file
.MWP Lotus Wordpro 97 smartmaster file
.MXD ArcInfo map file
.MXT Microsoft C Datafile
.MYD Make your point presentation file.
N
.N64 Nintendo 64 Emulator ROM image.
.NA2 Netscape Communicator address book.
.NAB Novell Groupwise address book
.NAP Napster Music security definition file.
.NDF NeoPlanet Browser file
.NDX Indexed file for most databases.
.NES Nintendo Entertainment system ROM image.
.NIL Norton guide online documentation
.NGF Enterasys Networks NetSight file.
.NHF Nero HFS-CD compilation or a general Nero file
.NIL Norton icon lybrary file.
.NLB Oracle 7 data file
.NLD ATI Radeon video driver file,
.NMI SwordSearcher file.
.NON LucasArts Star Wars - Tie fighter mouse options file.
.NOW Extension commonly used for readme text files.
.NRA Nero Audio CD file.
.NRB Nero CD-ROM boot file.
.NS2 Lotus Notes 2 database,
.NS5 Lotus Notes Domino file,
.NSO NetStudio easy web graphics file.
.NT Windows NT startup file.
.NUM File used with some Software Manufactures to store technical support numbers or other phone numbers, should be readable from DOS and or Windows.
O
.OCA Control Typelib Cache.
.OCX Object Linking and Embedding (OLE) control extension.
.OLB Object library
.OLD Used for backups of important files incase they are improperly updated or deleted.
.OLE Object Linking and Embedding object file
.OLI Olivetti text file
.ORI Original file.
P
.PAB Personal Address Book, file used with Microsoft Outlook.
.PB WinFax Pro phone book file
.PBD PowerBuilder dynamic library / Faxit phone book file
.PBF Turtle Beach Pinnacle bank file
.PBK Microsoft phonebook file
.PBL PowerBuilder library file
.PBM UNIX portable bitmap fuke
.PBR PowerBuilder resource
.PBI Profiler binary input file
.PBM PBM portable bit map graphic
.PBO Profiler binary output
.PBT Profiler binary table
.PCX Microsoft Paint & PC Paintbrush Windows/DOS.
.PDA Bitmap graphic file
.PDB TACT data file
.PDD Adobe PhotoDeluxe Image.
.PDF Adobe Acrobat Reader file which can only be read by Adobe Acrobat (to get file downloaded Adobe Acrobat from our Download Page.
.PDL Borland C++ project description language file.
.PDS Graphic file / Pldasm source code file.
.PDV Paintbrush printer driver.
.PDW Professional Draw document.
.PIC Picture / Viewer Frame Class.
.PIF Program Information File that configures a DOS app to run efficiently in windows.
.PJF Paintjet soft font file.
.PL Harvard palette file / PERL program file
.PL3 Harvard chart palette
.PLB Foxpro library / LogoShow Screensaver file
.PLC Lotus Add-in
.PLD PLD2 source file
.PLG REND386 / AVRIL file
.PLI Oracle 7 data description
.PLL Prelinked library
.PLM DisorderTracker2 module
.PLN WordPerfect spreadsheet file
.PLR Descent Pilot file
.PLS WinAmp MPEG playlist file / DisorderTracker 2 Sample file / Shoutcast file / MYOB data file
.PLT AutoCAD HPGL vector graphic plotter file / Gerber sign-making software file / Betley's CAD Microstation driver configuration for plotting
.PLY Autodesk polygon
.PP Compressed archive file.
.PP4 Picture Publisher.
.PP5 Picture Publisher.
.PPA Power Point Add-in.
.PPB WordPerfect Print preview button bar.
.PPD PostScript Printer description.
.PPF Turtle Beach Pinnacle program file.
.PPI Microsoft PowerPoint graphic file.
.PPL Harvard (now Serif) Polaroid Palette Plus ColorKey Driver.
.PPM PBM Portable Pixelmap Graphic.
.PPO Clipper Preprocessor Output.
.PPP Serif PagePlus Publication.
.PPS Microsoft PowerPoint Slideshow.
.PPT Microsoft PowerPoint presentation.
.PPX Serif PagePlus publication.
.PPZ Microsoft PowerPoint Packaged Presentation.
.PS2 File to support the Micro Channel Architecture in 386 Enhanced mode.
.PSD Adobe Photoshop image file.
.PST Post Office Box file used with Microsoft Outlook usually mailbox.pst unless named otherwise.
.PWA Password agent file.
.PWD Password file.
.PWF ProCite Workforms
.PWL Password file used in Windows 95 and Windows 98 is stored in the Windows directory.
.PWP Photoworks image file
.PWZ PowerPoint wizard
Q
.QIC Windows backup file
.QT Quick Time Movie File
.QXD Quark Express file
.QXL Quark Xpress element library
.QXT Quark Xpress template file
R
.RA Real Audio file.
.RAM Real Audio file.
.RAR Compressed file similar to .ZIP uses different compression program to extract. See our recommended download page for a program that can be used to extract .RAR files.
.RAS File extension used for raster graphic files.
.RD1 Descent registered level file
.RD3 Ray Dream designer graphics file / CorelDraw 3D file
.RD4 Ray Dream designer graphics file
.RD5 Ray Dream designer graphics file
.RDB TrueVector rules database
.RDF Resource description framework file / Chromeleon report definition
.RDL Descent registered level file / RadioDestiny radio stream
.RDX Reflex data file
.REC Sound file used with Windows Sound Recorder.
.RLE Microsoft Windows Run Length Encoded (Run Length Encoded (bitmap format) file that contains the actual screen logo).
.RMI Microsoft RMID sound file.
.RPB Automotive diagnostic file.
.RPD Rapidfile database
.RPM Red Hat Package Manager / RealMedia Player file.
.RPT Various Report file
.RTF Rich Text Format file
.RWZ Microsoft Outlook rules wizard file
S
.SAV File that usually contains saved information such as a saved game.
.SC2 Maps used in Sim City 2000.
.SCP Dialup Networking script file.
.SCR Source files for the .INI files, or sometimes may be used as screen savers.
.SD Sound Designer I audio file
.SD2 Sound Designer II flattened file / Sound Designer II data fork file / SAS database file
.SDA StarOffice drawing file / SoftCuisine data archive
.SDC StarOffice spreadsheet
.SDD StarOffice presentation
.SDF Standard data format file / Schedule data file / System file format / Autodesk mapguide spatial data file
.SDK Roland S-series floppy disk image
.SDL SmartDraw library
.SDN Small archive
.SDR SmartDraw drawing
.SDS StarOffice chart file / Raw MIDI sample dump standard file
.SDT SmartDraw template
.SDV Semicolon divided value file
.SDW Sun Microsystems StarOffice file document file similar to the Microsoft Office .DOC file.
.SDX MIDI sample dump standard files compacted by SDX
.SEA Short for Self Extracting Archive. Compressed file used with the Macintosh.
.SH Archive file
.SH3 Harvard (now Serif) presentation file
.SHB Corel Background file
.SHG Hotspot Editor Hypergraphic
.SHK Macintosh Compressed Archive file
.SHM WordPerfect Shell Macro
.SHP 3D Studio Shapes File / other 3D related file
.SHR Archive file
.SHS Shell scrap object file
.SHW Corel presentation / WordPerfect Slide Show / Show File
.SLK Multiplan file.
.SND Sound Clip file / Raw unsigned PCM data / AKAI MPC-series sample / NeXT sound / Macintosh sound resource file
.SNG MIDI song
.SNM Netscape Mail
.SNO SNOBOL program file
.SNP Snapview snapshot file
.SUM Summary file.
.SWF Macromedia Flash file.
.SWP Extension used for the Windows Swap File usually Win386.Swp. This file is required by Windows and generally can grow very large in size sometimes up to several hundred megs. This file is used to swap information between currently running programs and or memory. If this file is deleted from the computer Windows will be unable to load and will need to be reinstalled.
.SYS System and peripheral drivers.
T
.TDF Trace Definition File used with OS/2
.TGA Targa file
.TIF Tag Image Format that includes most 24-bit color.
.TLB Remote automation truelib files / OLE type library / Visual C++ type library
.TLD Tellix file
.TLE NASA two-line element set
.TLP Microsoft project timeline fie
.TLT Trellix web design file
.TLX Trellix data file
.TMP Temporary files.
.TRM Windows Terminal.
.TXT Text file that can be read from windows of from DOS by using the Edit, Type, or Edlin.
U
.UNI MikMod (UniMod) format file / Forcast Pro data file
.UNK Unknown file type, sometimes used when a file is received that cannot be identified
.UNX Text file generally associated with UNIX.
.URL File used with some browsers such as Internet Explorer linking you to different web pages. Internet Shortcut.
V
.VB VBScript file
.VBA vBase file
.VBD ActiveX file
.VBE VBScript encoded script file
.VBG Visual Basic group project file
.VBK VisualCADD backup file
.VBL User license control file
.VBP Visual Basic project file
.VBR Remote automation registration files
.VBS Microsoft Visual Basic Script file for quick programs and in some cases can be used as a virus file.
.VBW Visual Basic project workplace
.VBX Visual Basic extension file
.VBZ Wizard launch file
.VC VisiCalc Spreadsheet file.
.VCD VisualCADD Drawing file.
.VCE Natural MicroSystems voice file.
.VCF vCard File / Vevi Configuration file.
.VCS Microsoft Outlook vCalander file.
.VCT FoxPro class library.
.VCW Microsoft Visual C++ workbench information file.
.VCX FoxPro class library.
.VDA Targa bitmap
.VDD Short for Virtual Device Driver. Additional information can be found here.
.VDO VDOScript file
.VDX No such file extension - Likely you meant to .vxd
.VM Virtual Machine / Virtual Memory file.
.VMM Virtual Machine (Memory Manager) file.
.VMF Ventura font characteristics file / FaxWorks audio file
.VMH
.VS2 Roland-Bass transfer file.
.VSD Visio drawing.
.VSL GetRight download list file.
.VSS Visio stencil.
.VST Video Template / Truevision Vista graphic / Targa Bitmap/
.VSW Visio workspace file.
.VXD Windows system driver file allowing a driver direct access to the Windows Kernel, allowing for low level access to hardware.
W
.WAB Microsoft Outlook Express personal address book.
.WAD File first found in IdSoftware games such as DOOM, Quake, as well as most new games similar to these.
.WAV Sound files in Windows open and played with sound recorder.
.WB1 Quattro Pro Notebook
.WB2 Quattro Pro Spreadsheet
.WBF Microsoft Windows Batch File
.WBK Wordperfect document / workbook
.WBT Winbatch batch file
.WCD Wordperfect macro token list
.WCM Microsoft Works data transmission file / Wordperfect Macro
.WCP Wordperfect product information description
.WDB Microsoft Works database
.WEB Web source code file
.WFM dBASE Form object
.WFN CorelDRAW font
.WFX Winfax data file
.WG1 Lotus 1-2-3 worksheet
.WG2 Lotus 1-2-3 for OS/2 worksheet
.WID Ventura publisher width table
.WIN Foxpro - dBASE window file
.WIZ Microsoft Publisher page wizard
.WK1 Lotus 1-2-3 all versions / LotusWorks spreadsheet.
.WK3 Lotus 1-2-3 for Windows /Lotus 1-2-3 Rel.3.
.WKS Lotus 1-2-3 Rel lA,2.0,2.01, also file used with Microsoft Works.
.WLG Dr. Watson log file.
.WMA Windows Media Audio file.
.WMF Windows Metafile. Also see WMF dictionary definition.
.WMZ Windows Media Player theme package file.
.WPD WordPerfect Windows/DOS.
.WPG WordPerfect Graphical files Windows/DOS.
.WPM WordPerfect Macro file.
.WPS MS Works word processor Windows/DOS.
.WRI Windows Write.
.WRK Lotus 1-2 31.0,1.01,1.1/ Symphony 1,1.01.
.WRI Symphony l.1,1.2,2 / Microsoft Write file.
X
.XIF Wang image file / Xerox image file
.XLB Microsoft Excel File.
.XLS Microsoft Excel File.
.XM Sound file / Fast tracker 2 extended module
.XML Extensible markup language file.
.XNK Exchange shortcut
.XOT Xnetech job output file
.XPM X picsmap graphic
.XQT SuperCalc macro sheet
.XRF Cross Reference
.XR1 Epic MegaGames Xargon File
.XSL XML Style sheet
.XSM LEXIS-NEXIS tracker
.XTB LocoScript external translation table
.XWD X Windows dump file
.XWF Yamaha XG Works file
.XXE Xxencoded file
.XY XYWrite text file
.XY3 XYWrite text file
.XY4 XYwrite IV document
.XYP XYwrite III plus document
.XYW XYwrite Windows 4.0 document
Y
.Y Amiga YABBA compressed file archive
.Y01 Paradox index file
.Y02 Paradox index file
.Y03 Paradox index file
.Y04 Paradox index file
.Y05 Paradox index file
.Y06 Paradox index file
.Y07 Paradox index file
.Y08 Paradox index file
.Y09 Paradox index file
.YUV Yuv graphics file
.YZ YAC compressed file archive.
Z
.Z Compressed file that can hold thousands of files. To extract all the files Pkzip or Winzip will need to be used. UNIX / Linux users use the compress / uncompress command to extract these files.
.ZIP Compressed file that can hold thousands of files. To extract all the files Pkzip or Winzip will need to be used.
.$$$ Temporary file
.$$A OS/2 program file
.$$F OS/2 database file
.$$S OS/2 spreadsheet file
.$D$ OS/2 planner file
.$DB DBASE IV temporary file
.$ED Microsoft C temporary editor file.
.$VM Microsoft Windows temporary file for virtual managers.
._DD Norton disk doctor recovery file.
._DM Nuts n Bolts disk minder recovery file.
.--- File used to backup sys, ini, dat, and other important files from Windows 3.1 and above.
.075 Ventura Publisher 75x75 dpi screen characters
.085 Ventura Publisher 85x85 dpi screen characters
.091 Ventura Publisher 91x91 dpi screen characters
.096 Ventura Publisher 96x96 dpi screen characters
.0B Pagemaker printer font LineDraw enhanced characters.
.1ST File used by some software manufacturers to represent a file that should be read first before starting the program.
.2GR File used in Windows 3.x to display the graphics on older 286 and 386 computers.
.386 Virtual machine support files for the 386 enhanced mode.
.3GR File used in Windows 3.x to display the graphics on later 386, 486 and Pentium computers.
.4SW 4DOS Swap file
A
A ADA program file or UNIX library
.A3W MacroMedia Authorware 3.5 file
.ABK Autobackup file used with Corel Draw 6 and above.
.ABR Brush file for Adobe Photoshop
.ACT Adobe Photoshop Color table file.
.AD After Dark file.
.ADF Adapter description files.
.ADM After Dark screen saver module.
.ADR After Dark randomizer
.AI Adobe Illustrator file.
.AIF Auto Interchange File Format (AIFF) Audio file.
.ANI Windows 95 / Windows 98 / Windows NT animated mouse cursor file.
.ANS ANSI text file.
.ARJ Compressed file can be used with Winzip / Pkzip.
.ASC ASCII Text file
.ASF Sort for Advanced Streaming Format, file developed by Microsoft. The .ASF file is generally a movie player and can be open with software such as Windows Media Player.
.ASP Microsoft FrontPage Active Server Pages. To open these files use your internet browser.
.AVI Windows Movie file.
B
.BAK Backup file used for important windows files usually used with the System.ini and the Win.ini.
.BAS QBasic program and or Visual Basic Module.
.BAT Batch file that can perform tasks for you in dos, like a macro.
.BFC Microsoft Windows 95 / Windows 98 Briefcase file.
.BG Backgammon game file.
.BIN Translation tables for code pages other than the standard 437.
.BK2 Word Perfect for Windows Backup file
.BK3 Word Perfect for Windows Backup file
.BK4 Word Perfect for Windows Backup file
.BK5 Word Perfect for Windows Backup file
.BK6 Word Perfect for Windows Backup file
.BK7 Word Perfect for Windows Backup file
.BK8 Word Perfect for Windows Backup file
.BK9 Word Perfect for Windows Backup file
.BMP Graphical Bit Mapped File used in Windows Paintbrush.
.BNK Sim City Backup
.BPS Microsoft Works Word Processor File.
.BPT Corel Draw Bitmap master file
.BV1 Word Perfect for Windows Backup file
.BV2 Word Perfect for Windows Backup file
.BV3 Word Perfect for Windows Backup file
.BV4 Word Perfect for Windows Backup file
.BV5 Word Perfect for Windows Backup file
.BV6 Word Perfect for Windows Backup file
.BV7 Word Perfect for Windows Backup file
.BV8 Word Perfect for Windows Backup file
.BV9 Word Perfect for Windows Backup file
.BWP BatteryWatch pro file.
C
.C C file used with the C programming language.
.CAB Cabinet file used in Windows 95 and Windows 98 that contains all the windows files and drivers. Information about how to extract a .CAB file can be found on document CH000363.
.CAL Windows Calendar, Supercalculator4 file or Supercal spreadsheet.
.CBL COBOL Program File
.CBT Computer Based Training files.
.CDA CD Audio Player Track.
.CDR Corel Draw Vector file.
.CFB Comptons Multimedia file
.CFG Configuration file
.CFL Corel flowchart file
.CFM Corel FontMaster file / Cold Fusion Template file / Visual dBASE windows customer form
.CHK Scandisk file which is used to back up information that scandisk has found to be bad, found in C root. Because the information within these files are corrupted or reported as bad by Scandisk it is perfectly fine to delete these files, providing you are currently not missing any information. Additional information about scandisk can be found on our scandisk page.
.CL Generic LISP source code.
.CL3 Easy CD Creator layout file.
.CL4 Easy CD Creator layout file.
.CLA Java Class file.
.CLG Disk catalog database
.CLK Corel R.A.V.E. animation file.
.CLL Crick software clicker file
.CLO Cloe image
.CLP Windows Clipboard / Quattro Pro clip art / Clipper 5 compiler script
.CLR WinEdit Colorization word list / 1st reader binary color screen image / PhotStyler color definition
.CLS Visual Basic Class module / C++ Class definition
.CMD Windows Script File also OS/2 command file.
.CMV Corel Movie file.
.CNT Help file (.hlp) Contents (and other file contents)
.CPL Windows 95 / Windows 98 / Windows NT control panel icons.
.CNE Configuration file that builds .COM files.
.CNF Configuration file.
.COB COBOL source code file.
.COD FORTRAN Compiler program code
.COM File that can be executed.
.CPE Fax cover page file
.CPI Code Page Information or Microsoft Windows applet control panel file
.CPP C++ source code file.
.CRD Windows Card file.
.CSV Comma-Separated Variable file. Used primary with databases and spreadsheets / Image file used with CopuShow
.CUR Windows Mouse Cursor.
.CVS Canvas drawing file
.CXX C++ program file or Zortech C++ file
D
.DAT Data file, generally associated or extra data for a program to use.
.DB Paradox database file / Progress database file
.DB2 dBase II file
.DBC Microsoft Visiual Foxpro database container
.DBF dBase II,III,III+,IV / LotusWorks database.
.DBK dBase databse backup / Orcad schematic capture backup file
.DBM Cold Fusion template
.DBO dBase IV compiled program file
.DBQ Paradox memo
.DBT dBase database text file
.DBV Flexfile memo field file
.DBW DataBoss database file
.DBX Database file / DataBeam Image / MS Visual Foxpro Table
.DEV Device Driver
.DIF Document Interchange Format; VisiCalc
.DLL Dynamic Link Library; Allow executable code modules to be loaded on demand, linked at run time, and unloaded when not needed. Windows uses these files to support foreign languages and international/nonstandard keyboards.
.DMO Demo file
.DMP Dump file
.DMD Visual dBASE data module
.DMF Delusion/XTracker Digital Music File
.DMO Demo file
.DMP Dump file
.DMS Compressed archive file
.DOC Microsoft Word Windows/DOS / LotusWorks word processor Windows/DOS /PF S:First Choice Windows/DOS DOT MS Word Windows/DOS.
.DOS Text file and DOS Specification Info
.DOT Microsoft Word Template (Macro).
.DRV Device driver files that attach the hardware to Windows. The different drivers are system, keyboard, pointing devices, sound, printer/ plotter, network, communications adapter.
.DRW Micrografx draw/graph files.
.DT_ Macintosh Data File Fork
.DTA Data file
.DTD SGML Document definition file
.DTF Q&A database
.DTM DigiRekker module
.DTP SecurDesk! Desktop / Timeworks Publisher Text Document / Pressworks Template file
.DUN Dialup Networking exported file.
.DX Document Imaging file / Digital data exchange file
.DXB Drawing interchange binary file
.DXF Autocad drawing interchange format file
.DXN Fujitsu dexNet fax document
.DXR Macromedia director projected movie file
.DYN Lotus 1-2-3 file
.DWG AutoCad Drawing Database
E
.EEB Button bar for Equation Editor in Word Perfect for Windows
.EFT CHIWRITER high resolution screen characters
.EGA EGA screen characters for Ventura Publisher
.ELG Event List text file used with Prosa
.EMS Enhanced Menu System configuration file for PC Tools
.EMU IRMA Workstation for Windows emulation
.ENC ADW Knowledge Ware Encyclopedia
.END Corel Draw Arrow Definition file
.ENG Sprint dictionary file engine
.ENV Word Perfect for Windows environment file.
.EPG Exported PaGe file used with DynaVox
.EPS Encapsulated Postscript, with embedded TIFF preview images.
.EQN Word Perfect for Windows Equation file
.ERD Entity Relation Diagram graphic file
.ERM Entity Relation Diagram model file
.ERR Error log file
.ESH Extended Shell Batch file
.EVT Event file scheduler file for PC Tools
.EX3 Device driver for Harvard graphics 3.0
.EXC QEMM exclude file from optimization file or Rexx program file
.EXE Executable file.
.EXT Extension file for Norton Commander
F
.FDF Adobe Acrobat Forms Document.
.FF AGFA CompuGraphics outline font description.
.FFA Microsoft Fast Find file.
.FFF GUS PnP bank / defFax fax document
.FFL Microsoft Fast Find file / PrintMaster Gold form file
.FFO Microsoft Fast Find file
.FFT DCA/FFT final form text
.FFX Microsoft Fast Find file
.FON Font files to support display and output devices.
.FR3 dBase IV renamed dBase III+ form
.FRF FontMonger Font
.FRG dBase IV uncompiled report
.FRK Compressed zip file used with Apple Macinotsh computers.
.FRM Form file used with various programs / Microsoft Visual Basic Form / FrameMaker document / FrameBuilder file / Oracle executable form / Word Perfect Merge form / DataCAD symbol report file
.FRO dBase IV compiled report / FormFlow file
.FRP PerForm Pro Plus Form
.FRS WordPerfect graphics driver
.FRT FoxPro report file
.FRX Microsoft Visual basic binary form file / FoxPro report file
.FRZ FormFlow file
G
.GIF CompuServe Graphics Interchange Format.
.GR2 286 grabbers that specify which font to use with DOS and Windows.
.GR3 386 grabbers that specify which font to use with DOS and Windows.
.GRA Microsoft Flight simulator graphics file
.GRB Microsoft MS-DOS shell monitor
.GRF Micrografx draw/graph files.
.GRP Microsoft Program Group.
.GZ Compressed Archive file for GZip
H
.HBK Mathcad handbook file
.HDL Procomm Plus alternate download file listing
.HDR Procomm Plus message header
.HDX Help index
.HEX Hex dump
.HFI GEM HP font info
.HGL HP graphics language graphic
.HH C++ Header
.HHH Precompiled Header for Power C
.HHP Help data for Procomm Plus
.HLP Files that contain the Help feature used in windows, cannot be read from DOS.
.HQX Apple Macintosh Binhex text conversion file.
.HSQ Data files associated with the Qaz Trojan.
.HSS Photoshop Hue/Saturation information.
.HST History file / Procomm Plus History File / Host file.
.HTA Hypertext Application (run applications from HTML document).
.HTM Web page files containing HTML or other information found on the Internet.
I
.ICA Citrix file / IOCA graphics file
.ICB Targa Bitmap
.ICC Kodak printer image
.ICE Archive file
.ICL Icon library file
.ICM Image Color Matching profile file
.ICN Microsoft Windows Icon Manager.
.ICO Microsoft Windows Icondraw / Icon.
.ID Disk identification file.
.IDB Microsoft developer intermediate file, used with Microsoft Visual Studio
.IDD MIDI instruments definition
.IDE Integrated Development Environment configuration file
.IDF MIDI instruments drivers file
.IDQ Internet data query file
.IDX Index file
.IFF IFF/LBM (Amiga) used by Computer Eyes frame grabber.
.IMG GEM/IMG (Digital Research) or Ventura Publisher bitmap graphic
.INF Information file that contains customization options.
.INI Files that initialize Windows and Windows apps.
.IPF Installer Script File / OS/2 online documentation for Microsoft source files.
.ISO Compressed file used for an exact duplicate of a CD. .ISO files can be extracted or opened such programs as Win Image that can be found on our shareware download section.
.IWA IBM Writing Assistant Text file.
J
.JAS Graphic
.JPG Graphic commonly used on the Internet and capable of being opened by most modern image editors.
.JS JavaScript file.
.JSB Henter-Joyce Jaws script binary file
.JSD eFAX jet suite document
.JSE JScript encoded script file
.JSH Henter-Joyce Jaws script header file
.JSL PaintShop pro file
.JSM Henter-Joyce Jaws script message file
.JSP Java server page
.JSS Henter-Joyce Jaws script source file
.JT JT fax file
.JTF JPEG tagged Interchange format file
.JTK Sun Java toolkit file
.JTP JetForm file
.JW Justwrite text file
.JWL Justwrite text file library
.JZZ Jazz spreadsheet
K
.KAR Karaoke File used with some audio players.
L
.LGC Program Use Log File (for Windows Program Use Optimization).
.LGO Contains the code for displaying the screen logo.
.LOG Contains the process of certain steps, such as when running scandisk it will usually keep a scandisk.log of what occurred.
.LNK HTML link file used with Microsoft Internet Explorer.
.LWP Lotus Wordpro 96/97 file.
M
.MAC Macintosh macpaint files.
.MBX Microsoft Outlook Express mailbox file.
.MD Compressed Archive file
.MDA Microsoft Access Add-in / Microsoft Access 2 Workgroup.
.MDB Microsoft Access Database / Microsoft Access Application.
.MDE Microsoft Access Database File
.MDF Menu definition file
.MDL Digitrakker Music Module / Rational Rose / Quake model file
.MDM Telix Modem Definition
.MDN Microsoft Access Blank Database Template
.MDP Microsoft Developer Studio Project
.MDT Microsoft Access Add-in Data
.MDW Microsoft Access Workgroup Information
.MDX dBase IV Multiple Index
.MDZ Microsoft Access Wizard Template
.MEB WordPerfect Macro Editor bottom overflow file
.MED WordPerfect Macro Editor delete save / OctaMed tracker module
.MEM WordPerfect Macro Editor macro / Memory File of variables
.MID Midi orchestra files that are used to play with midi sounds built within the sound card.
.MIX Power C object file / Multiplayer Picture file (Microsoft Photodraw 2000 & Microsoft Picture It!) / Command & Conquer Movie/Sound file
.MOD Winoldap files that support (with grabbers) data exchange between DOS apps and Windows apps.
.MOV File used with Quick Time to display a move.
.MP1 MPEG audio stream, layer I
.MP2 MPEG audio stream, layer II
.MP3 MPEG audio stream, layer III; High compressed audio files generally used to record audio tracks and store them in a decent sized file available for playback. See our MP3 page for additional information.
.MPG MPEG movie file.
.MSN Microsoft Network document / Decent mission file
.MTF Windows metafile.
.MTH Derive Math file
.MTM Sound file / MultiTracker music module
.MTV Picture file
.MTW Minitab data file
.MU Quattro menu
.MUL Ultima Online game
.MUP Music publisher file
.MUS Audio file
.MVB Database file / Microsoft multimedia viewer file
.MVE Interplay video file
.MVF Movie stop frame file
.MWP Lotus Wordpro 97 smartmaster file
.MXD ArcInfo map file
.MXT Microsoft C Datafile
.MYD Make your point presentation file.
N
.N64 Nintendo 64 Emulator ROM image.
.NA2 Netscape Communicator address book.
.NAB Novell Groupwise address book
.NAP Napster Music security definition file.
.NDF NeoPlanet Browser file
.NDX Indexed file for most databases.
.NES Nintendo Entertainment system ROM image.
.NIL Norton guide online documentation
.NGF Enterasys Networks NetSight file.
.NHF Nero HFS-CD compilation or a general Nero file
.NIL Norton icon lybrary file.
.NLB Oracle 7 data file
.NLD ATI Radeon video driver file,
.NMI SwordSearcher file.
.NON LucasArts Star Wars - Tie fighter mouse options file.
.NOW Extension commonly used for readme text files.
.NRA Nero Audio CD file.
.NRB Nero CD-ROM boot file.
.NS2 Lotus Notes 2 database,
.NS5 Lotus Notes Domino file,
.NSO NetStudio easy web graphics file.
.NT Windows NT startup file.
.NUM File used with some Software Manufactures to store technical support numbers or other phone numbers, should be readable from DOS and or Windows.
O
.OCA Control Typelib Cache.
.OCX Object Linking and Embedding (OLE) control extension.
.OLB Object library
.OLD Used for backups of important files incase they are improperly updated or deleted.
.OLE Object Linking and Embedding object file
.OLI Olivetti text file
.ORI Original file.
P
.PAB Personal Address Book, file used with Microsoft Outlook.
.PB WinFax Pro phone book file
.PBD PowerBuilder dynamic library / Faxit phone book file
.PBF Turtle Beach Pinnacle bank file
.PBK Microsoft phonebook file
.PBL PowerBuilder library file
.PBM UNIX portable bitmap fuke
.PBR PowerBuilder resource
.PBI Profiler binary input file
.PBM PBM portable bit map graphic
.PBO Profiler binary output
.PBT Profiler binary table
.PCX Microsoft Paint & PC Paintbrush Windows/DOS.
.PDA Bitmap graphic file
.PDB TACT data file
.PDD Adobe PhotoDeluxe Image.
.PDF Adobe Acrobat Reader file which can only be read by Adobe Acrobat (to get file downloaded Adobe Acrobat from our Download Page.
.PDL Borland C++ project description language file.
.PDS Graphic file / Pldasm source code file.
.PDV Paintbrush printer driver.
.PDW Professional Draw document.
.PIC Picture / Viewer Frame Class.
.PIF Program Information File that configures a DOS app to run efficiently in windows.
.PJF Paintjet soft font file.
.PL Harvard palette file / PERL program file
.PL3 Harvard chart palette
.PLB Foxpro library / LogoShow Screensaver file
.PLC Lotus Add-in
.PLD PLD2 source file
.PLG REND386 / AVRIL file
.PLI Oracle 7 data description
.PLL Prelinked library
.PLM DisorderTracker2 module
.PLN WordPerfect spreadsheet file
.PLR Descent Pilot file
.PLS WinAmp MPEG playlist file / DisorderTracker 2 Sample file / Shoutcast file / MYOB data file
.PLT AutoCAD HPGL vector graphic plotter file / Gerber sign-making software file / Betley's CAD Microstation driver configuration for plotting
.PLY Autodesk polygon
.PP Compressed archive file.
.PP4 Picture Publisher.
.PP5 Picture Publisher.
.PPA Power Point Add-in.
.PPB WordPerfect Print preview button bar.
.PPD PostScript Printer description.
.PPF Turtle Beach Pinnacle program file.
.PPI Microsoft PowerPoint graphic file.
.PPL Harvard (now Serif) Polaroid Palette Plus ColorKey Driver.
.PPM PBM Portable Pixelmap Graphic.
.PPO Clipper Preprocessor Output.
.PPP Serif PagePlus Publication.
.PPS Microsoft PowerPoint Slideshow.
.PPT Microsoft PowerPoint presentation.
.PPX Serif PagePlus publication.
.PPZ Microsoft PowerPoint Packaged Presentation.
.PS2 File to support the Micro Channel Architecture in 386 Enhanced mode.
.PSD Adobe Photoshop image file.
.PST Post Office Box file used with Microsoft Outlook usually mailbox.pst unless named otherwise.
.PWA Password agent file.
.PWD Password file.
.PWF ProCite Workforms
.PWL Password file used in Windows 95 and Windows 98 is stored in the Windows directory.
.PWP Photoworks image file
.PWZ PowerPoint wizard
Q
.QIC Windows backup file
.QT Quick Time Movie File
.QXD Quark Express file
.QXL Quark Xpress element library
.QXT Quark Xpress template file
R
.RA Real Audio file.
.RAM Real Audio file.
.RAR Compressed file similar to .ZIP uses different compression program to extract. See our recommended download page for a program that can be used to extract .RAR files.
.RAS File extension used for raster graphic files.
.RD1 Descent registered level file
.RD3 Ray Dream designer graphics file / CorelDraw 3D file
.RD4 Ray Dream designer graphics file
.RD5 Ray Dream designer graphics file
.RDB TrueVector rules database
.RDF Resource description framework file / Chromeleon report definition
.RDL Descent registered level file / RadioDestiny radio stream
.RDX Reflex data file
.REC Sound file used with Windows Sound Recorder.
.RLE Microsoft Windows Run Length Encoded (Run Length Encoded (bitmap format) file that contains the actual screen logo).
.RMI Microsoft RMID sound file.
.RPB Automotive diagnostic file.
.RPD Rapidfile database
.RPM Red Hat Package Manager / RealMedia Player file.
.RPT Various Report file
.RTF Rich Text Format file
.RWZ Microsoft Outlook rules wizard file
S
.SAV File that usually contains saved information such as a saved game.
.SC2 Maps used in Sim City 2000.
.SCP Dialup Networking script file.
.SCR Source files for the .INI files, or sometimes may be used as screen savers.
.SD Sound Designer I audio file
.SD2 Sound Designer II flattened file / Sound Designer II data fork file / SAS database file
.SDA StarOffice drawing file / SoftCuisine data archive
.SDC StarOffice spreadsheet
.SDD StarOffice presentation
.SDF Standard data format file / Schedule data file / System file format / Autodesk mapguide spatial data file
.SDK Roland S-series floppy disk image
.SDL SmartDraw library
.SDN Small archive
.SDR SmartDraw drawing
.SDS StarOffice chart file / Raw MIDI sample dump standard file
.SDT SmartDraw template
.SDV Semicolon divided value file
.SDW Sun Microsystems StarOffice file document file similar to the Microsoft Office .DOC file.
.SDX MIDI sample dump standard files compacted by SDX
.SEA Short for Self Extracting Archive. Compressed file used with the Macintosh.
.SH Archive file
.SH3 Harvard (now Serif) presentation file
.SHB Corel Background file
.SHG Hotspot Editor Hypergraphic
.SHK Macintosh Compressed Archive file
.SHM WordPerfect Shell Macro
.SHP 3D Studio Shapes File / other 3D related file
.SHR Archive file
.SHS Shell scrap object file
.SHW Corel presentation / WordPerfect Slide Show / Show File
.SLK Multiplan file.
.SND Sound Clip file / Raw unsigned PCM data / AKAI MPC-series sample / NeXT sound / Macintosh sound resource file
.SNG MIDI song
.SNM Netscape Mail
.SNO SNOBOL program file
.SNP Snapview snapshot file
.SUM Summary file.
.SWF Macromedia Flash file.
.SWP Extension used for the Windows Swap File usually Win386.Swp. This file is required by Windows and generally can grow very large in size sometimes up to several hundred megs. This file is used to swap information between currently running programs and or memory. If this file is deleted from the computer Windows will be unable to load and will need to be reinstalled.
.SYS System and peripheral drivers.
T
.TDF Trace Definition File used with OS/2
.TGA Targa file
.TIF Tag Image Format that includes most 24-bit color.
.TLB Remote automation truelib files / OLE type library / Visual C++ type library
.TLD Tellix file
.TLE NASA two-line element set
.TLP Microsoft project timeline fie
.TLT Trellix web design file
.TLX Trellix data file
.TMP Temporary files.
.TRM Windows Terminal.
.TXT Text file that can be read from windows of from DOS by using the Edit, Type, or Edlin.
U
.UNI MikMod (UniMod) format file / Forcast Pro data file
.UNK Unknown file type, sometimes used when a file is received that cannot be identified
.UNX Text file generally associated with UNIX.
.URL File used with some browsers such as Internet Explorer linking you to different web pages. Internet Shortcut.
V
.VB VBScript file
.VBA vBase file
.VBD ActiveX file
.VBE VBScript encoded script file
.VBG Visual Basic group project file
.VBK VisualCADD backup file
.VBL User license control file
.VBP Visual Basic project file
.VBR Remote automation registration files
.VBS Microsoft Visual Basic Script file for quick programs and in some cases can be used as a virus file.
.VBW Visual Basic project workplace
.VBX Visual Basic extension file
.VBZ Wizard launch file
.VC VisiCalc Spreadsheet file.
.VCD VisualCADD Drawing file.
.VCE Natural MicroSystems voice file.
.VCF vCard File / Vevi Configuration file.
.VCS Microsoft Outlook vCalander file.
.VCT FoxPro class library.
.VCW Microsoft Visual C++ workbench information file.
.VCX FoxPro class library.
.VDA Targa bitmap
.VDD Short for Virtual Device Driver. Additional information can be found here.
.VDO VDOScript file
.VDX No such file extension - Likely you meant to .vxd
.VM Virtual Machine / Virtual Memory file.
.VMM Virtual Machine (Memory Manager) file.
.VMF Ventura font characteristics file / FaxWorks audio file
.VMH
.VS2 Roland-Bass transfer file.
.VSD Visio drawing.
.VSL GetRight download list file.
.VSS Visio stencil.
.VST Video Template / Truevision Vista graphic / Targa Bitmap/
.VSW Visio workspace file.
.VXD Windows system driver file allowing a driver direct access to the Windows Kernel, allowing for low level access to hardware.
W
.WAB Microsoft Outlook Express personal address book.
.WAD File first found in IdSoftware games such as DOOM, Quake, as well as most new games similar to these.
.WAV Sound files in Windows open and played with sound recorder.
.WB1 Quattro Pro Notebook
.WB2 Quattro Pro Spreadsheet
.WBF Microsoft Windows Batch File
.WBK Wordperfect document / workbook
.WBT Winbatch batch file
.WCD Wordperfect macro token list
.WCM Microsoft Works data transmission file / Wordperfect Macro
.WCP Wordperfect product information description
.WDB Microsoft Works database
.WEB Web source code file
.WFM dBASE Form object
.WFN CorelDRAW font
.WFX Winfax data file
.WG1 Lotus 1-2-3 worksheet
.WG2 Lotus 1-2-3 for OS/2 worksheet
.WID Ventura publisher width table
.WIN Foxpro - dBASE window file
.WIZ Microsoft Publisher page wizard
.WK1 Lotus 1-2-3 all versions / LotusWorks spreadsheet.
.WK3 Lotus 1-2-3 for Windows /Lotus 1-2-3 Rel.3.
.WKS Lotus 1-2-3 Rel lA,2.0,2.01, also file used with Microsoft Works.
.WLG Dr. Watson log file.
.WMA Windows Media Audio file.
.WMF Windows Metafile. Also see WMF dictionary definition.
.WMZ Windows Media Player theme package file.
.WPD WordPerfect Windows/DOS.
.WPG WordPerfect Graphical files Windows/DOS.
.WPM WordPerfect Macro file.
.WPS MS Works word processor Windows/DOS.
.WRI Windows Write.
.WRK Lotus 1-2 31.0,1.01,1.1/ Symphony 1,1.01.
.WRI Symphony l.1,1.2,2 / Microsoft Write file.
X
.XIF Wang image file / Xerox image file
.XLB Microsoft Excel File.
.XLS Microsoft Excel File.
.XM Sound file / Fast tracker 2 extended module
.XML Extensible markup language file.
.XNK Exchange shortcut
.XOT Xnetech job output file
.XPM X picsmap graphic
.XQT SuperCalc macro sheet
.XRF Cross Reference
.XR1 Epic MegaGames Xargon File
.XSL XML Style sheet
.XSM LEXIS-NEXIS tracker
.XTB LocoScript external translation table
.XWD X Windows dump file
.XWF Yamaha XG Works file
.XXE Xxencoded file
.XY XYWrite text file
.XY3 XYWrite text file
.XY4 XYwrite IV document
.XYP XYwrite III plus document
.XYW XYwrite Windows 4.0 document
Y
.Y Amiga YABBA compressed file archive
.Y01 Paradox index file
.Y02 Paradox index file
.Y03 Paradox index file
.Y04 Paradox index file
.Y05 Paradox index file
.Y06 Paradox index file
.Y07 Paradox index file
.Y08 Paradox index file
.Y09 Paradox index file
.YUV Yuv graphics file
.YZ YAC compressed file archive.
Z
.Z Compressed file that can hold thousands of files. To extract all the files Pkzip or Winzip will need to be used. UNIX / Linux users use the compress / uncompress command to extract these files.
.ZIP Compressed file that can hold thousands of files. To extract all the files Pkzip or Winzip will need to be used.
Subscribe to:
Posts (Atom)
.jpg)
